Approach Lamps enable for Jaguar & Land Rover — have the exterior lights welcome you by illuminating as you approach the car with the key. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the puddle/approach lamp hardware.
What this activation does
- Turns on approach (welcome) lighting so the exterior lamps — including puddle and handle lights — illuminate as you walk up to the car with the key.
- Lights your way to the door and adds a premium welcome touch.
- Software enable only — requires the approach/puddle lamp hardware. Coded to your VIN / As-Built.
Choose the option that matches your vehicle
| Dropdown option |
What it means |
| Not Fitted |
Tells the car the approach-lamp hardware is not present — feature stays off. |
| Fitted |
Enables approach (welcome) lamps. Choose this when the puddle/approach lamp hardware is fitted. |
Key terms explained
-
Approach Lamps: Exterior welcome lighting — headlamps, tail lamps, door-handle and puddle lights — that switches on automatically as the driver approaches the vehicle carrying the key, then fades once inside.
-
CCF (Car Configuration File): The master list of feature flags stored in the vehicle. Setting a value here switches a factory feature on or off. All of these activations are done by editing the CCF, not by fitting parts.
-
As-Built: Your vehicle's original factory configuration record, tied to the VIN. Every change is written back against your As-Built so the car stays consistent with JLR records.
-
Coded to your VIN: The change is applied to your specific vehicle over the OBD diagnostic port — remote and mobile, no bench work and no new hardware.
-
Error / Undefined: Factory enumeration place-holders that exist inside the parameter list. They are not real choices — do not select them. Pick the plain-English option that matches your vehicle.
The CCF parameters behind Approach Lamps
The dropdown above maps to these values in the Car Configuration File:
| CCF address |
Parameter |
Block |
Byte |
Bits |
Values (from the CCF data set) |
| 0x2B72 |
Interior Lights 1 – Approach Lamps |
0x2B |
7 |
2 |
00 = not fitted, 01 = fitted. |
Approach lamps light the puddle lamps, door handles and exterior lamps as you walk up to the car with the key. They need the puddle/handle lamps fitted. Where the lamps are there but the function was never enabled we switch it on; software cannot add lamps — we check your As-Built first.
Approach Lamps on Jaguar Land Rover — 2010 to 2026
Earliest model year the option existed on each line:
| Model |
Platform |
Model years |
Notes |
| Range Rover |
L322 |
2010–2012 |
Approach lighting on the upper trims from the facelift. |
| Range Rover / Range Rover Sport |
L405 / L494 |
2013–2022 |
Approach lighting with puddle and handle lamps. |
| Jaguar / Land Rover |
all lines |
2013–2026 |
Approach lighting on cars with the puddle/handle lamps fitted. |
Earliest model year the option existed on each line; it needs the puddle/handle lamps fitted. We confirm by VIN.
Two ways we switch this on — both remote, no parts
Depending on model year and architecture, Approach Lamps is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
-
CCF editing over OBD — on cars that carry the puddle and handle lamps we set the approach-lamps flag above in the Car Configuration File, write it back against your As-Built, then re-configure the body and interior-lighting modules so the lamps light as you walk up.
-
OEM-tool online configuration — where the module holding the flag needs its configuration re-issued from the manufacturer’s programming database rather than a direct CCF value, the same result is completed remotely through the OEM diagnostic tool’s online configuration for that module.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.