L460 Locked BCM RFA Latest Security applied 2024 RFA Unlock and Erase old Lost keys

0:00: The screen displays "Lock50 Easy Job Spare Key L460 Locked BCM RFA Latest Security applied 2024 RFA Unlock and Erase old Lost keys without module changes or Removal" at the top. The main screen shows Vehicle Info: VIN (SXLKA9A...83), Brand: Land Rover, Model: New Range Rover / L460, Model Year: 2024, Engine: 3.0L Petrol PHEV, Body: 5 door, Drive: RHD, Transmission: 8-Speed Automatic. On the right, icons for CCF Utilities, PEPS System, and Special Tools are visible.
0:06: The user scrolls down slightly on the right menu.
0:09: The user clicks on "Special Tools".
0:10: The screen changes to "Diagnostic Tools > Special Tools". Icons displayed include Key Duplicator, Arm Off, RFA Downgrade, Replace RFA (BCM is locked), EVA2 RFA Unlock, Virginize IPC.
0:12: The user clicks on "EVA2 RFA Unlock".
0:13: An "Information" dialog box appears. Description: "This function is intended for unlocking a secured RFA module. This function is available on vehicles equipped with EVA2 electrical system." It notes: "* This function requires 2 Existing Keys. ** If 2 existing keys are missing, an additional connection to the internal CAN bus is required." A "Select option" dropdown is visible.
0:15: The dropdown is opened, showing "I have 2 Existing Keys" and "I will use Special Connection".
0:22: "I will use Special Connection" is selected.
0:26: The user clicks "OK".
0:27: A new "Unlock RFA Module Information" dialog appears. Function description: "This function requires an additional connection to the internal CAN bus: * Connect the DoIP cable to the OBD diagnostic connector. * Use the Special Adapter to establish a direct connection to the internal bus."
0:38: The user clicks "OK".
0:45: A "Connecting to vehicle" dialog with a spinning circle and "Processing... Please wait until it is completed." text appears.
0:50: A "Warning!" dialog appears: "Operation finished with warning. Task Report: Application Error (20491): Internal CAN-BUS connection required. Description: Internal CAN-BUS not connected. Application is not able to communicate with the vehicle. Check the connection."
0:55: The user clicks "Retry".
1:00: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:05: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:10: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:15: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:20: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:21: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:26: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:31: The "Warning!" dialog is still present. The user clicks "Retry" again.
1:32: The "Connecting to vehicle" and "Processing..." dialog reappears.
1:33: "Reading Part Numbers" is displayed.
1:34: "Processing... RFA" is displayed.
1:35: "Download Software" is displayed.
1:36: "Downloading file 2 of 3" is displayed.
1:37: "Programming Initialisation" is displayed. "Processing... RFA".
1:46: "RFA upload LBB2-14C104-AA" is displayed. Then "RFA Memory Erase".
1:49: "RFA upload LBB2-14C104-AX" is displayed, with a progress bar "Processing 6/11 -- 0%" to "6/11 -- 98%".
2:22: "Processing 8/11 -- %" to "8/11 -- 73%", "9/11 -- 23%" to "9/11 -- 100%".
2:27: "RFA upload LBB2-14C430-AE" is displayed, with "Processing... 100%".
2:29: "Collecting Data", "Processing... RFA".
2:30: "Unlock RFA Module Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
2:31: The user clicks "OK".
2:32: The screen returns to the Vehicle Info.
2:34: The user clicks on "PEPS System". The screen shows "Diagnostic Tools > Utilities > PEPS Utilites". RFA Control Module Data shows "RFA Lock Status... Unlocked", "Programmed Keys... 2", "Passive key #1 Id... A9628DE5", "Passive key #2 Id... 14628DE5".
2:39: The user scrolls down and clicks on ">> Replace RFA module" under "Key Learning".
2:42: An "Information" dialog for "Replace RFA Module" appears: "This function will setup a new Security Codes. This function will delete all Learnt Keys. This function will replace/repair Ultra Wide Band SAT Transceivers. -Make sure that the installed RFA has the correct firmware levels. If there are any issues on the operation it may result in the loss of ignition operation."
2:43: The user clicks "OK".
2:43: A "Warning!" dialog for "Checking modules connection" appears: "Operation finished with warning. Task Report: Application Error (20492): ECU not present. Description: IPCB Control Module is missing or not responding."
2:45: The user clicks "Abort".
2:46: The user clicks on ">> Replace RFA module" again.
2:47: The "Information" dialog reappears. The user clicks "OK".
2:48: The "Warning!" dialog reappears. The user clicks "Abort".
2:49: The user clicks on ">> Replace RFA module" again.
3:05: The "Information" dialog reappears. The user clicks "OK".
3:13: The "Warning!" dialog reappears. The user clicks "Abort".
3:14: The user clicks on ">> Check All Learnt Keys" under "PEPS System Test Utilities".
3:15: "Connecting to vehicle", "Processing... RFA" dialog appears.
3:16: A "Warning!" dialog appears: "Operation finished with warning. Task Report: Application Error (20492): ECU not present. Description: IPCB Control Module is missing or not responding."
3:17: The user clicks "Abort".
3:19: The user clicks on "Control Modules".
3:20: The screen shows a list of control modules with green checkmarks for connected/OK and red exclamation marks for errors. ABS, BCM, EESM, EPIC, HVAC, IPCB, PCM, RCM, PSM, are shown with errors (red icon).
3:26: The user clicks back to Vehicle Info and then on "Diag Utilities".
3:27: The user clicks on "Network Integrity Test" (stethoscope icon).
3:28: "Connecting to vehicle" dialog appears. Then "Download Vehicle Info...".
3:33: "Force Ignition On" is displayed. Then it proceeds to process multiple modules (BCM, CHCM, EESM, EPIC, HCM, IPCB, PCM, RCM, RFA, RGTMB, SODL, TBM, HUD, FARC, ICIMA, TRM, OCS) with "Processing..." messages.
4:07: The processing finishes. The screen returns to Vehicle Info. Control Modules still show red icons.
4:15: The user clicks back to Vehicle Info, then "PEPS System".
4:18: The user clicks ">> Replace RFA module".
4:20: The "Information" dialog appears. The user clicks "OK".
4:21: "Force Ignition On", "Processing... BCM", "Learn Target Security Id", "Processing... BCM" dialogs appear.
4:26: A "Warning!" dialog appears: "Operation finished with warning. Task Report: BCM routine completed with invalid return code. Description: Return Code: Less Than The 2 Keys Found".
4:28: The user clicks "Abort".
4:29: The screen returns to "PEPS Utilities". "Programmed Keys... 2" is still displayed.
4:32: The user clicks on "Replace RFA (BCM is locked)" under "Special Tools".
4:33: An "Information" dialog for "Replace RFA Module (Locked BCM)" appears. "This function will setup a new RFA Module. This function is intended for LOCKED BCM modules where [Replace RFA] function is not available. -Make sure that the installed RFA has the correct firmware levels."
4:34: The user clicks "OK".
4:34: "Force Ignition On", "Processing... BCM", "Collecting Data", "Processing... RFA", "Processing... BCM", "Learn Vehicle Tracking Id", "Processing... RFA", "Processing... BCM", "Rolling Code Synchronization", "Processing... DDM", "Processing... PDM", "Processing... DRDM", "Processing... PRDM", "Learn Passive Secret Key", "Processing... RFA", "Processing... BCM", "Learning VIN", "Processing... RFA", "Collecting Data", "Processing... RFA" dialogs appear sequentially.
4:57: "Replace RFA Module (Locked BCM) Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
4:58: The user clicks "OK".
4:59: The screen returns to the Vehicle Info.
5:00: The user clicks "PEPS System". The "PEPS Utilities" screen now shows "Programmed Keys... 0".
5:06: The user clicks "Control Modules" then "Diag Utilities" then performs "Network Integrity Test" again. The process is similar to 3:27-4:07, processing modules. No error dialogs pop up.
5:52: The Network Integrity Test completes.
5:53: The user clicks back to Vehicle Info, then "PEPS System".
5:56: The "PEPS Utilities" screen shows "Programmed Keys... 0".
5:57: The user clicks "Special Tools".
5:58: The user clicks "Replace RFA (BCM is locked)".
5:59: The "Information" dialog appears. The user clicks "OK".
6:02: "Force Ignition On", "Processing... BCM", "Collecting Data", "Processing... RFA", "Processing... BCM", "Learn Vehicle Tracking Id", "Processing... RFA", "Processing... BCM", "Rolling Code Synchronization", "Processing... DDM", "Processing... PDM", "Processing... DRDM", "Processing... PRDM", "Learn Passive Secret Key", "Processing... RFA", "Processing... BCM", "Delete all learnt keys", "Processing... RFA", "Learning VIN", "Processing... RFA", "Collecting Data", "Processing... RFA" dialogs appear sequentially.
6:32: "Replace RFA Module (Locked BCM) Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
6:33: The user clicks "OK".
6:35: The screen returns to the Vehicle Info.
6:36: The user clicks "PEPS System". "Programmed Keys... 0".
6:39: The user clicks ">> Add Additional Passive Key".
6:40: An "Information" dialog for "Add Additional Key" appears: "This function will add additional Passive Key to vehicle. Click [OK] and follow further instructions."
6:41: The user clicks "OK".
6:41: An "Action Required" dialog appears: "This operation requires an OEM Keyless Entry Remote. See the image below to ensure you are using the correct part." An image of a JLR smart key with part numbers LR116874 / LR128398 is shown. "Place Key on KeyReader and Click [OK]".
6:42: The user clicks "OK".
6:42: A "Read Key Identification Complete" dialog appears: "Operation successfully completed. All checks are passed. Description: Key Fob has been detected. Key SerialNo: 14628DE5. Put Key Fob on the passenger seat. Click Next to continue."
6:43: The user clicks "Next".
6:43: "Add Additional Key", "Processing... RFA" dialog appears.
6:47: A "Warning!" dialog appears: "Operation finished with warning. Task Report: RFA routine completed with invalid return code. Description: Return Code: Lock Config Timeout".
6:48: The user clicks "Retry".
6:51: An "Action Required" dialog appears: "Place Key on KeyReader and Click [OK]".
6:52: The user clicks "OK".
6:52: A "Read Key Identification Complete" dialog appears: "Operation successfully completed. All checks are passed. Description: Key Fob has been detected. Key SerialNo: 4F7040EF. Put Key Fob on the passenger seat. Click Next to continue."
6:54: The user clicks "Next".
6:55: "Add Additional Key", "Processing... RFA" dialog appears.
6:58: A "Warning!" dialog appears: "Operation finished with warning. Task Report: RFA routine completed with invalid return code. Description: Return Code: Lock Config Timeout".
6:59: The user clicks "Retry".
7:03: A "Warning!" dialog appears: "Operation finished with warning. Task Report: Application Error (20500) : key not found. Description: Key was not detected. Put Key on the KeyReader and repeat operation."
7:04: The user clicks "Retry".
7:06: "Add Additional Key", "Processing... RFA" dialog appears.
7:11: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 1. Added Key Number : 1. Added Key SerialNo : 4F7040EF. Click Next to continue. Do you want add more Keys?"
7:13: The user clicks "Yes".
7:14: A "Read Key Identification Complete" dialog appears: "Operation successfully completed. All checks are passed. Description: Key Fob has been detected. Key SerialNo: 14628DE5. Put Key Fob on the passenger seat. Click Next to continue."
7:16: The user clicks "Next".
7:16: "Add Additional Key", "Processing... RFA" dialog appears.
7:22: A "Warning!" dialog appears: "Operation finished with warning. Task Report: RFA routine completed with invalid return code. Description: Return Code: Timeout Waiting for Key".
7:23: The user clicks "Retry".
7:26: An "Action Required" dialog for "Check Keys" appears: "Place all already programed Keys on the passenger seat. Click [OK] to start operation."
7:27: The user clicks "OK".
7:27: "Write Emergency Keys Identification", "Processing... BCM", "Collecting Data", "Processing... BCM" dialogs appear.
7:31: A "Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
7:32: The user clicks "OK".
7:34: The screen returns to "PEPS Utilities". "Programmed Keys... 1", "Passive key #1 Id... 4F7040EF".
7:41: The user clicks "Workshop" in the top left, then "Identify Smart Key".
7:44: "Key Identification", "Processing..." dialog appears.
7:45: The "Key Identification" screen shows: "Key Serial Number... 14628DE5", "Key number... 2", "Learning status... Learned", "Lock status... Unlocked".
7:49: The user clicks "Clear Key" under "Key Utilities".
7:50: An "Information" dialog for "Clear Key" appears: "Function description: After this operation Key will be unlearned from current vehicle. * All security data will be removed from Key. * Key will be ready for relearning. * Use this function if you want to prevent further use of this key on the current vehicle. Make sure the coin-cell battery in condition."
7:51: The user clicks "OK".
7:51: "Clear Key", "Put Key on device...", "Processing..." dialog appears.
7:53: A "Complete" dialog appears: "Operation successfully completed. Return code 0: All checks are passed."
7:53: The user clicks "OK".
7:54: An "Action Required" dialog for "Read Key Data" appears.
7:55: A "Warning!" dialog appears: "Application Error (20500) : key not found. Description: Key was not detected. Put Key on the KeyReader and repeat operation."
7:56: The user clicks "Retry".
7:57: "Key Identification", "Processing..." dialog appears.
7:58: The "Key Identification" screen shows: "Key Serial Number... 14628DE5", "Key number... 2", "Country Code... not programmed", "Learning status... Unlearned", "Lock status... Unlocked".
8:02: The user navigates back to "PEPS Utilities". "Programmed Keys... 1", "Passive key #1 Id... 4F7040EF".
8:06: The user clicks ">> Add Additional Passive Key".
8:07: The "Information" dialog appears. The user clicks "OK".
8:08: The "Action Required" dialog for OEM Keyless Entry Remote appears.
8:09: The user clicks "OK".
8:09: The "Read Key Identification Complete" dialog appears, detecting "Key SerialNo: 14628DE5".
8:10: The user clicks "Next".
8:11: "Add Additional Key", "Processing... RFA" dialog appears.
8:15: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 2. Added Key Number : 2. Added Key SerialNo : 14628DE5. Click Next to continue. Do you want add more Keys?"
8:17: The user clicks "No".
8:18: An "Action Required" dialog for "Check Keys" appears.
8:19: The user clicks "OK".
8:20: "Write Emergency Keys Identification", "Processing... BCM", "Collecting Data", "Processing... BCM" dialogs appear.
8:24: A "Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
8:25: The user clicks "OK".
8:27: The "PEPS Utilities" screen shows "Programmed Keys... 2", "Passive key #1 Id... 4F7040EF", "Passive key #2 Id... 14628DE5".
8:32: The user scrolls up and down the PEPS Utilities screen, confirming the programmed keys.
8:40: The user clicks ">> Check All Learnt Keys".
8:41: "Processing... RFA" dialog appears.
8:45: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: OK. Number of Keys Programmed: 2. Number of Keys Found: 2."
8:49: The user clicks "OK".
8:50: The screen returns to "PEPS Utilities".
8:56: The user clicks back to Vehicle Info, then "Special Tools".
8:57: The user clicks "Replace RFA (BCM is locked)".
9:11: The "Information" dialog appears. The user clicks "OK".
9:12: "Force Ignition On", "Processing... BCM", "Collecting Data", "Processing... RFA", "Processing... BCM", "Learn Vehicle Tracking Id", "Processing... RFA", "Processing... BCM", "Rolling Code Synchronization", "Processing... DDM", "Processing... PDM", "Processing... DRDM", "Processing... PRDM", "Learn Passive Secret Key", "Processing... RFA", "Processing... BCM", "Delete all learnt keys", "Processing... RFA", "Learning VIN", "Processing... RFA", "Collecting Data", "Processing... RFA" dialogs appear sequentially.
9:39: "Replace RFA Module (Locked BCM) Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
9:40: The user clicks "OK".
9:42: The screen returns to the Vehicle Info.
9:43: The user clicks "PEPS System". "Programmed Keys... 0".
9:47: The user clicks "Identify Smart Key".
9:49: "Key Identification", "Processing..." dialog appears.
9:50: The "Key Identification" screen shows: "Key Serial Number... 14628DE5", "Key number... 2", "Learning status... Learned", "Lock status... Locked".
9:55: The user clicks "Clear Key".
9:56: The "Information" dialog appears. The user clicks "OK".
9:56: "Clear Key", "Put Key on device...", "Processing..." dialog appears.
9:58: A "Complete" dialog appears: "Operation successfully completed. Return code 0: All checks are passed."
9:58: The user clicks "OK".
10:00: An "Action Required" dialog for "Read Key Data" appears.
10:01: A "Warning!" dialog appears: "Application Error (20500) : key not found. Description: Key was not detected. Put Key on the KeyReader and repeat operation."
10:02: The user clicks "Retry".
10:03: "Key Identification", "Processing..." dialog appears.
10:04: The "Key Identification" screen shows: "Key Serial Number... 4F7040EF", "Key number... 15", "Country Code... not defined", "Learning status... Unlearned", "Lock status... Locked".
10:07: The user clicks "Clear Key".
10:08: The "Information" dialog appears. The user clicks "OK".
10:08: "Clear Key", "Put Key on device...", "Processing..." dialog appears.
10:10: A "Complete" dialog appears: "Operation successfully completed. Return code 0: All checks are passed."
10:10: The user clicks "OK".
10:11: An "Action Required" dialog for "Read Key Data" appears.
10:12: "Key Identification", "Processing..." dialog appears.
10:13: The "Key Identification" screen shows: "Key Serial Number... 4F7040EF", "Key number... 15", "Country Code... not defined", "Learning status... Unlearned", "Lock status... Locked".
10:15: The user navigates back to "PEPS Utilities". "Programmed Keys... 0".
10:18: The user clicks ">> Add Additional Passive Key".
10:19: The "Information" dialog appears. The user clicks "OK".
10:20: The "Action Required" dialog for OEM Keyless Entry Remote appears.
10:21: The user clicks "OK".
10:21: A "Warning!" dialog appears: "Application Error (20500) : key not found. Description: Key was not detected. Put Key on the KeyReader and repeat operation."
10:22: The user clicks "Retry".
10:24: "Key Identification", "Processing..." dialog appears.
10:25: The "Key Identification" screen shows: "Key Serial Number... 14628DE5", "Key number... 2", "Learning status... Unlearned", "Lock status... Unlocked".
10:26: The user clicks "Next".
10:27: "Add Additional Key", "Processing... RFA" dialog appears.
10:30: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 1. Added Key Number : 1. Added Key SerialNo : 4F7040EF. Click Next to continue. Do you want add more Keys?"
10:32: The user clicks "Yes".
10:33: The "Action Required" dialog for OEM Keyless Entry Remote appears.
10:34: The user clicks "OK".
10:35: The "Read Key Identification Complete" dialog appears, detecting "Key SerialNo: 14628DE5".
10:36: The user clicks "Next".
10:36: "Add Additional Key", "Processing... RFA" dialog appears.
10:41: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 2. Added Key Number : 2. Added Key SerialNo : 14628DE5. Click Next to continue. Do you want add more Keys?"
10:43: The user clicks "No".
10:44: An "Action Required" dialog for "Check Keys" appears.
10:45: The user clicks "OK".
10:45: "Write Emergency Keys Identification", "Processing... BCM", "Collecting Data", "Processing... BCM" dialogs appear.
10:49: A "Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
10:50: The user clicks "OK".
10:52: The "PEPS Utilities" screen shows "Programmed Keys... 2", "Passive key #1 Id... 4F7040EF", "Passive key #2 Id... 14628DE5".
11:04: The user clicks ">> Check All Learnt Keys".
11:05: "Processing... RFA" dialog appears.
11:08: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: OK. Number of Keys Programmed: 2. Number of Keys Found: 2."
11:09: The user clicks "OK".
11:10: The screen returns to "PEPS Utilities".
11:11: The user scrolls down. Shows "Passive key #1 Id... 4F7040EF", "Passive key #2 Id... 14628DE5".
11:13: The user clicks the back arrow.
11:14: The top bar shows "JLR Key Tool 1.3.64.0". Device Type: Lock50 Jlr Keylink, Serial Number: JLCU07B1LSKEBPSC, HW Revision: LKB4-20240229, SW Revision: LKB2-2010-2B240229. Firmware up to date.
11:15: The user clicks back.
11:21: The user clicks "Identify Smart Key".
11:24: "Key Identification" screen shows: "Key Serial Number... 14628DE5", "Key number... 2", "Learning status... Learned", "Lock status... Locked".
11:25: The user clicks "Clear Key".
11:26: The "Information" dialog appears. The user clicks "OK".
11:26: "Clear Key", "Put Key on device...", "Processing..." dialog appears.
11:27: "Complete" dialog appears. The user clicks "OK".
11:28: An "Action Required" dialog for "Read Key Data" appears.
11:29: The user clicks "OK".
11:30: The "Key Identification" screen shows: "Key Serial Number... 4F7040EF", "Key number... 15", "Country Code... not defined", "Learning status... Unlearned", "Lock status... Locked".
11:31: The user clicks "Clear Key".
11:32: The "Information" dialog appears. The user clicks "OK".
11:32: "Clear Key", "Put Key on device...", "Processing..." dialog appears.
11:34: "Complete" dialog appears. The user clicks "OK".
11:35: An "Action Required" dialog for "Read Key Data" appears.
11:36: The user clicks "OK".
11:37: The screen returns to Vehicle Info.
11:38: The user clicks "PEPS System". "Programmed Keys... 0".
11:39: The user clicks ">> Add Additional Passive Key".
11:40: The "Information" dialog appears. The user clicks "OK".
11:41: The "Action Required" dialog for OEM Keyless Entry Remote appears.
11:42: The user clicks "OK".
11:42: A "Warning!" dialog appears: "Application Error (20500) : key not found. Description: Key was not detected. Put Key on the KeyReader and repeat operation."
11:43: The user clicks "Retry".
11:45: The "Read Key Identification Complete" dialog appears, detecting "Key SerialNo: 4F7040EF".
11:46: The user clicks "Next".
11:46: "Add Additional Key", "Processing... RFA" dialog appears.
11:49: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 1. Added Key Number : 1. Added Key SerialNo : 4F7040EF. Click Next to continue. Do you want add more Keys?"
11:51: The user clicks "Yes".
11:52: The "Read Key Identification Complete" dialog appears, detecting "Key SerialNo: 14628DE5".
11:53: The user clicks "Next".
11:53: "Add Additional Key", "Processing... RFA" dialog appears.
11:57: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: Key Added Ok. Number of Keys Programmed : 2. Added Key Number : 2. Added Key SerialNo : 14628DE5. Click Next to continue. Do you want add more Keys?"
11:59: The user clicks "No".
12:00: An "Action Required" dialog for "Check Keys" appears.
12:01: The user clicks "OK".
12:01: "Write Emergency Keys Identification", "Processing... BCM", "Collecting Data", "Processing... BCM" dialogs appear.
12:05: A "Complete" dialog appears: "Operation successfully completed. Description: Operation was performed successfully."
12:06: The user clicks "OK".
12:07: The "PEPS Utilities" screen shows "Programmed Keys... 2", "Passive key #1 Id... 4F7040EF", "Passive key #2 Id... 14628DE5".
12:08: The user clicks ">> Check All Learnt Keys".
12:09: "Processing... RFA" dialog appears.
12:12: A "Complete" dialog appears: "Operation successfully completed. Description: RFA routine has been completed successfully. Return Code: OK. Number of Keys Programmed: 2. Number of Keys Found: 2."
12:13: The user clicks "OK".
12:14: The screen returns to "PEPS Utilities".
12:15: The user scrolls down. Shows "Passive key #1 Id... 4F7040EF", "Passive key #2 Id... 14628DE5".
12:17: The video ends with the car info screen again.