SW30 Lock50 HW04-C OBD Tool JLR 2022 to 2024+ Add OEM UWB/PEPS Keys when Locked RFA & Locked BCM
Latest Models Make Life Simpler and ADD OEM or Non Oem Keys in to Locked RFA BCM Vehicles.
BCM Supported L8B2 + R8E2 + M8E2
Check in the BCM Software Version and if you see these BCM types used then can use this fucntion.
Note this lets you ADD New keys in the Locked RFA BCM
Note this does not allow delete old Keys and to do that a new RFA must flashed with lock50 after being replaced and keys programmed again.
To Add Keys in a Locked RFA & Locked BCM Vehicle with Platform called EVA2 with BCM Types L8B2 or R8E2 or M8E2 simply add your 2 working keys on the passenger seat.
Run the Add keys option in Key Learning and add your new Key on the the Lock50 and Add on the Seat to Finish the Operation when instructed by the Lock50 JLR Keys Tools Software.
If you have 1 Key then use the Duplicator SW36 to make copy of the 2nd key.
If you have no keys then use Duplicator to make copy of 2 keys first on to HW13/HW14 keys its possible to also add OEM or Non OEM keys in to the Locked RFA
or See if your client has the App and can enable Service Mode then if you enable that its possible to also add OEM keys in to the Locked RFA without swapping modules.
Make all keys lost or spare keys using same process
Add oem keys in Locked RFA BCM without using any parts in under 10 min the whole job
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd