4x4 Information Display for Jaguar & Land Rover — Enable 4x4 Information Display on the touchscreen for off-road telemetry. Set in software via the CCF and coded to your VIN / As-Built over the OBD port — remote & mobile.
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x2147 | 4x4 Information Display | 0x21 | 4 | 7–0 | 01 = not enabled, 02 = enabled. |
| 0x7777 | 4x4 Info Driveline | 0x77 | 7 | 7–5 | 01 = not fitted, 02 = MultiCAN, 03 = EVA1, 04 = EVA2 torque bar display. |
The 4x4 Information Display enables the off-road screens — wheel articulation, driveline, pitch and roll — on the centre display. It needs the chassis sensors and display that feed it. Where the hardware is present but the screens were never enabled we switch them on; software cannot add sensors that are not fitted — we check your As-Built first and set only what your car carries.
Earliest model year the options existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | 4x4 info screens where the sensors and display are fitted. |
| Land Rover Discovery / Defender | L462 / L663 | 2017–2026 | 4x4 information display on the current Land Rover lines. |
| Range Rover / Range Rover Sport | L460 / L461 | 2022–2026 | Off-road info screens on the current platforms. |
Earliest model year the 4x4 info display existed on each line; Land Rover only; needs the sensors and display fitted. We confirm by VIN.
Depending on model year and architecture, the 4x4 Information Display is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()