Active Roll Control for Jaguar & Land Rover — Enable Active Roll Control (ARC) for reduced body roll and improved handling. Set in software via the CCF and coded to your VIN / As-Built over the OBD port — remote & mobile.
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x2287 | Active Roll Control | 0x22 | 8 | 7–0 | 01 = not fitted, 02 = fitted (active anti-roll bars). |
| 0x0F67 | Roll Stability | 0x0F | 6 | 7–0 | 01 = without, 02 = with roll stability control. |
| 0x0C57 | Active Suspension (CCC) | 0x0C | 5 | 7–0 | 01 = without continuously controlled chassis, 02 = with CCC active damping. |
The Active Roll Control option enables the active anti-roll system that stiffens the bars in corners. It needs the active roll bars and dampers fitted. Where the hardware is present but the feature was never enabled we switch it on; software cannot add roll bars that are not fitted — we check your As-Built first and set only what your car carries.
Earliest model year the options existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover Sport / SVR | L494 / L461 | 2015–2026 | Active roll control where the roll bars are fitted. |
| Land Rover Defender | L663 | 2019–2026 | Roll control and stability on the current Defender. |
| Range Rover / Range Rover Sport | L405 / L460 | 2013–2026 | Active roll and suspension options on the current platforms. |
Earliest model year active roll control existed on each line; needs the roll bars and dampers fitted. We confirm by VIN.
Depending on model year and architecture, the Active Roll Control is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()