Retractable Running Boards enable for Jaguar & Land Rover — switch on the powered side steps that deploy when a door opens and tuck away when you drive off. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the running-board hardware fitted.
| Dropdown option | What it means |
|---|---|
| Not supported | The parameter is not supported on this vehicle / platform. Do not select. |
| Without Retractable Running Board | No running-board hardware fitted — the feature stays off. |
| Retractable Running Board Button Controlled | Running boards controlled by a physical button. Choose if that matches your vehicle. |
| Retractable Running Board Menu Controlled | Running boards controlled through the touchscreen menu. Choose if that matches your vehicle. |
| Error | Factory place-holder value — not a real choice, do not select. |
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x1E27 | Retractable Running Board | 0x1E | 2 | 7–0 | 01 = without retractable running board, 02 = retractable running board button controlled, 03 = retractable running board menu controlled. |
Deployable (retractable) side steps swing out when a door opens and tuck away when it shuts. They need the step motors and brackets fitted. Where the steps are there but the function was never enabled we switch it on; software cannot add the steps — we check your As-Built first.
Earliest model year the option existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | Deployable side steps option on the upper trims. |
| Range Rover / Range Rover Sport | L460 / L461 | 2022–2026 | Deployable side steps where fitted. |
Earliest model year the option existed on each line; it needs the step motors fitted. We confirm by VIN.
Depending on model year and architecture, the Retractable Running Board is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()