Lane Keep / Lane Departure Warning for Jaguar & Land Rover — activate the Lane Departure Warning (LDW) system, with driver menu and sensitivity options, combined with the matching Traffic Sign Recognition (TSR) state. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.
| Dropdown option | What it means |
|---|---|
| LDW Fitted & TSR Fitted | Lane Departure Warning active and Traffic Sign Recognition active — the common "both on" choice. |
| LDW Fitted & TSR Fitted with Overspeed | LDW active; TSR active and also warns when you exceed the detected speed limit. |
| LDW Fitted & TSR Not Fitted | LDW active; Traffic Sign Recognition left off. |
| LDW Fitted with Enable Menu & TSR Fitted | LDW active with an on/off Enable menu in settings; TSR active. |
| LDW Fitted with Sensitivity Menu & TSR Fitted | LDW active with a warning-sensitivity menu; TSR active. |
| LDW Fitted Enable Menu and Sensitivity Menu & TSR Fitted | LDW active with both the Enable and Sensitivity menus; TSR active — the fullest LDW option. |
| LDW Not Fitted & TSR Fitted | Lane Departure Warning off; Traffic Sign Recognition active. |
| LDW Not Fitted & TSR Not Fitted | Both Lane Departure Warning and Traffic Sign Recognition off. |
| (other LDW/TSR pairings) | The list also offers every remaining combination of LDW state (off / fitted / with Enable menu / with Sensitivity menu / with both menus) against TSR state (off / fitted / fitted with overspeed). Choose the single pair that matches your vehicle. |
| Error Condition | Factory place-holder / error-state values — not real choices, do not select. |
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x4821 | LaneKeepAssistLKA | 0x48 | 2 | 1–0 | 01 = LKA not fitted, 02 = LKA fitted. |
| 0x6631 | LaneKeepAssistLDW | 0x66 | 3 | 1–0 | 01 = Lane Departure Warning not fitted, 02 = fitted. |
| 0x0E87 | LANE DEPARTURE WARNING (combined LDW / TSR byte) | 0x0E | 8 | 7–0 | 11 = LDW not fitted, 21 = LDW fitted, 31 = LDW fitted with enable menu, 41 = LDW fitted with sensitivity menu, 51 = LDW fitted with enable and sensitivity menu (the low nibble carries the TSR state). |
| 0x8047 | LaneAssistMenu | 0x80 | 4 | 7–5 | 01 = not fitted, 02 = Lane Assistance menu fitted. |
| 0x8162 | LaneAssistEmrgMenu | 0x81 | 6 | 2–0 | 01 = not fitted, 02 = Emergency Lane Keeping menu fitted, 03 = legacy. |
| 0x8A47 | DriverLaneChange | 0x8A | 4 | 7–6 | 01 = not fitted, 02 = fitted. |
| 0x8C37 | PromptedLaneChange | 0x8C | 3 | 7–6 | 01 = not fitted, 02 = fitted. |
These are camera and radar features. We only switch on what your car can physically do: the forward-facing camera lives in the windscreen behind the mirror and, for the braking and adaptive-cruise functions, a forward radar behind the grille. We read your As-Built first — software cannot add a camera or radar that is not fitted.
Earliest model year the system existed on each line (it needs the forward camera):
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | Lane Departure Warning offered from launch in the driver-assistance package; Lane Keep Assist on cars with the camera-equipped mirror. |
| Range Rover Evoque / Discovery Sport | L538 / L550 | 2012–2026 | LDW and Lane Keep Assist with the forward camera. |
| Discovery | L462 | 2017–2026 | Lane Keep Assist across the range. |
| Defender / Range Rover / Range Rover Sport | L663 / L460 / L461 | 2020–2026 | Lane Keep Assist standard; Emergency Lane Keeping and driver lane-change prompts where fitted. |
Earliest model year the system existed on each line; the car still needs the forward camera. We confirm by VIN.
Depending on model year and architecture, Lane Keep Assist and Lane Departure Warning is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()