Rear Door Sunblinds enable for Jaguar & Land Rover — switch on the manual or powered rear-door window blinds, with or without the door switches. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the blinds fitted.
| Dropdown option | What it means |
|---|---|
| Not supported | The parameter is not supported on this vehicle / platform. Do not select. |
| Without Rear Door Blinds | No rear-door blinds fitted — the feature stays off. |
| With Rear Door Blinds without Switches | Rear-door blinds fitted but with no dedicated door switches (manual or centrally controlled). |
| With Rear Door Blinds with Switches | Rear-door blinds fitted together with their own door switches to raise and lower them. |
| Error | Factory place-holder value — not a real choice, do not select. |
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x1C27 | Rear Door Sunblinds | 0x1C | 2 | 7–0 | 01 = without rear door blinds, 02 = blinds without switches, 03 = blinds with switches, 04 = blinds without switches with PWM. |
Powered rear door sunblinds need the blind motors and (where used) the door switches fitted. Where the blinds are there but the function was never enabled we switch it on; software cannot add the blinds — we check your As-Built first.
Earliest model year the option existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover | L322 | 2010–2012 | Powered rear door sunblinds on the top trims from the 2010 facelift. |
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | Powered rear door sunblinds on the upper trims. |
| Range Rover / Range Rover Sport | L460 / L461 | 2022–2026 | Powered rear door sunblinds where fitted. |
Earliest model year the option existed on each line; it needs the blind motors fitted. We confirm by VIN.
Depending on model year and architecture, Rear Door Sunblinds is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()