HW52 1 Plug RFA K8D2-19H440-AC LR117928 / T2H38587 — Non UWB
All RFA types listed here can be purchased from a JLR dealer. Select the correct part number for the vehicle; dealer availability is separate from this website’s stock quantity. Do not substitute another plug count or part number solely because of a stock notice.
HW52 identifies K8D2-19H440-AC. This one-plug RFA does not support UWB.
Non UWB: This K8D2-19H440-AC RFA does not support Ultra-Wideband (UWB).
RFA programming: use CAN with the HW03-D cable or DoIP with the HW03-E cable, subject to the supported vehicle and tool licence. Programming the RFA and completing the Replace RFA procedure are separate steps.
Replace RFA on a vehicle with an IPCB cluster: use the HW03-E cable in DoIP mode. CAN mode cannot communicate with the IPCB cluster required for this procedure, even when the RFA itself can be programmed over CAN.
Check the vehicle architecture and actual BCM/GWM lock state before choosing the programming route. The required software licence or TOPIx access must be active.
A new RFA must be correctly matched, programmed and adapted to the vehicle before compatible fixed-ID keys are learned. The route depends on the vehicle architecture and the BCM lock state, not just the part number or model year. This is an overview for professional installers: follow the current Lock50 instructions and on-screen prompts for the specific vehicle.
Confirm the replacement assembly, connector arrangement, vehicle application, key frequency and UWB configuration. Read the module information and actual RFA/BCM lock states with Lock50. Confirm your HW04 package, enabled functions and cable before starting. Use suitable battery support throughout programming.
For a supported vehicle with an unlocked BCM, SW27 provides the new-RFA programming route. It is available on HW04-A+, B, C and C+; HW04-A requires the A+ upgrade. A+ uses the HW03-D dual-CAN cable for supported CAN jobs. B and higher can use the appropriate supported CAN or DoIP route. Programme and adapt the replacement RFA using the vehicle-specific workflow, then complete key learning and the checks requested by the tool.
Learn more: SW27 new-RFA programming, package and cable requirements.
If the BCM is locked, do not treat the job as ordinary unlocked-BCM programming. On supported vehicles, SW28 provides the Special Functions > Replace RFA route to adapt a new RFA while retaining the existing BCM. This requires HW04-B or higher, the appropriate enabled function and the HW03-E DoIP cable. Confirm support for the exact vehicle and BCM before proceeding; fitting a new RFA alone does not complete adaptation.
Learn more: SW28 locked-BCM replacement and HW04 function/package overview. The comparison identifies the replacement-RFA function separately from ordinary key adding.
Where the vehicle has an IPCB cluster or other DoIP-only modules, DoIP communication is needed for the supported replacement workflow and module synchronisation, even when the RFA is the only part being changed. The HW03-D CAN cable cannot communicate with those DoIP-only modules. SW37 covers DoIP programming and diagnostics; DoIP cable usage is included with HW04-B and higher. Follow the HW03-E connection instructions and the tool prompts.
Read the SW37 DoIP function overview · Read the HW03-E DoIP cable and connection guidance.
After replacement adaptation, learn compatible fixed-ID keys, not Change-ID copying keys. Follow the frequency and key-choice tables below. On supported UWB-equipped installations, the Lock50 one-click UWB OFF option allows compatible lower-cost non-UWB keys; it does not unlock or adapt modules. A non-UWB RFA does not gain UWB hardware by changing a setting.
Complete any immobilisation/synchronisation and diagnostic checks requested by the vehicle-specific workflow. Check each intended key for starting, remote buttons and the passive-entry functions supported by that key and vehicle. If lost-key removal is the purpose of the job, verify that the completed procedure excludes the old keys from both normal and emergency starting; do not assume fitting the module or copying a key achieves this.
SW27/SW28 concern the supported replacement-RFA route. SW29 adds or removes compatible keys on a supported unlocked RFA/KVM with an unlocked BCM. SW30 learning on an existing supported locked EVA2 system and SW36 copying are separate workflows, not substitutes for replacement adaptation or proof that lost keys have been fully removed.
Learn more: SW29 unlocked-system key adding and the replacement-route distinction · View the complete HW04 function and package overview.
Walk-away locking is M9R3-only. This JPLA, J9C3 or K8D2 RFA does not support walk-away locking, even if it supports UWB. Fitting a walk-away key or changing CCF settings does not add that function to this RFA.
New replacement RFA: use compatible fixed-ID keys, not Change-ID keys. Adapt the replacement RFA to the vehicle first, then learn the keys through the supported OBD procedure. Change-ID copying is a separate existing-system workflow, not the key choice for this new-RFA installation.
| This RFA | Specification / selection rule |
|---|---|
| Assembly | HW52 — K8D2-19H440-AC |
| Supported key frequency | 433 or 315 MHz. Supports compatible fixed-ID keys in either 433 MHz or 315 MHz. This does not make every key compatible or every frequency locally permitted; match the key type, vehicle and configuration. |
| UWB capability | Non-UWB. A UWB key or a CCF change cannot add UWB hardware to this module. |
| Programming | Replacement adaptation first; fixed-ID key learning second. Follow the CAN/DoIP, cable and licence guidance above. |
PS means Passive Start; PEPS means Passive Entry and Passive Start; FOB means the key fob. UWB means Ultra-Wideband distance ranging. Keyless entry is not the same thing as UWB.
| Key technology | How it is used | What must match |
|---|---|---|
| PSFOB without UWB | Press the fob button to lock/unlock; supported push-button start remains. | OEM HW15/HW16 and HW19/HW20 do not provide passive door-handle entry. |
| Non-UWB key with supported PEPS | HW17/HW18 can retain door-handle entry, remote buttons and keyless start through a compatible configuration and programming route. | No genuine UWB ranging; no approach unlocking or walk-away locking. |
| OEM PEPSFOB with UWB | Remote buttons, supported door-handle entry and keyless start. Genuine UWB hardware provides ranging when the vehicle supports and enables it. | HW21–HW26 are not the walk-away range. Compatible OEM UWB keys can retain door-handle entry with vehicle UWB off. |
| Approach / walk-away | Walk-away locking is not supported by this RFA. Only M9R3 RFA types support the walk-away function. | UWB support is not walk-away support. The walk-away key options are not recommended for this non-M9R3 module. |
This AB/AC RFA is non-UWB and supports compatible 433 MHz or 315 MHz fixed-ID keys. Use the appropriate non-UWB vehicle configuration. Where a supported replacement job needs vehicle UWB disabled, use the Lock50 one-click UWB OFF function over OBD. HW17/HW18 are the lower-cost non-OEM option with supported keyless entry and start.
UWB OFF is not keyless-entry OFF. Retained functions depend on the chosen key and vehicle. It disables genuine UWB ranging; it does not unlock the RFA, complete replacement adaptation or waive licensing and key-learning prerequisites.
The links below open the exact key instructions. Match vehicle brand/application as well as frequency. These are conditional choices, not universal fitment claims.
| Fixed-ID key family | Matching key links | Use / conditions |
|---|---|---|
| OEM Land Rover PSFOB — non-UWB |
HW15 — 433 MHz HW16 — 315 MHz |
Fob-button door entry and supported keyless start. No passive door-handle entry or approach/walk-away. Use the compatible non-UWB configuration. |
| Non-OEM JLR — non-UWB |
HW17 — 433 MHz HW18 — 315 MHz |
Lower-cost alternative. Supported door-handle entry, remote buttons and keyless start; no approach/walk-away. Use the compatible non-UWB configuration. |
| OEM Jaguar PSFOB — non-UWB |
HW19 — 433 MHz HW20 — 315 MHz |
Fob-button door entry and supported keyless start. No passive door-handle entry or approach/walk-away. Use the compatible non-UWB configuration. |
| OEM SVO PEPSFOB — UWB |
HW21 — 433 MHz HW22 — 315 MHz |
Supported door-handle entry, buttons and keyless start; not the walk-away range. Only in a compatible non-UWB configuration; the key does not add UWB ranging to this RFA. |
| OEM Jaguar PEPSFOB — UWB |
HW23 — 433 MHz HW24 — 315 MHz |
Supported door-handle entry, buttons and keyless start; not the walk-away range. Only in a compatible non-UWB configuration; the key does not add UWB ranging to this RFA. |
| OEM Land Rover PEPSFOB — UWB |
HW25 — 433 MHz HW26 — 315 MHz |
Supported door-handle entry, buttons and keyless start; not the walk-away range. Only in a compatible non-UWB configuration; the key does not add UWB ranging to this RFA. |
This non-M9R3 RFA does not support walk-away locking. Neither a different key nor a configuration change adds that function.
| Job | Correct route |
|---|---|
| New RFA fitted | Adapt the module, configure the supported UWB option, then learn compatible fixed-ID keys. Do not select Change-ID keys for this replacement route. |
| Existing supported unlocked RFA | Learn compatible fixed-ID keys without replacing a working module. |
| Existing locked RFA | A separate support-dependent job. Some locked EVA2 systems allow learning with the required detected keys or active service mode; other routes involve copying. Do not apply those exceptions as a blanket procedure for a new RFA. See the linked guides and individual key instructions. |
For the existing locked-EVA2 / UWB-on HW17/HW18 exception, SW36 copying first and RFA Check Keys detecting two working keys together precede SW30 learning. Service mode alone does not replace that copy-first requirement. This is not the new-RFA route described above. HW05–HW12 KVM/ALM keys and Change-ID HW13/HW14/HW29/HW30 are not listed as fixed-ID replacement-RFA choices.
The JLR Key Technology Explained · JLR Key Matrix and HW04 Package Comparison · JLR Key Programming Guide: Range Rover & Jaguar · Lock50 UWB OFF demonstration
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()