SW219 3D Surround Camera

Surround system configuration for Jaguar & Land Rover — set the surround-audio fitment used by the surround-view / multimedia system, from none up to full 3D Surround Audio. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

[Sign in to view price]
SW219 3D Surround Camera

This product is electronically distributed.

Please sign in to buy

Surround system configuration for Jaguar & Land Rover — set the surround-audio fitment used by the surround-view / multimedia system, from none up to full 3D Surround Audio. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

What this activation does

  • Sets which surround-audio level the vehicle expects — no surround, 2D surround, or full 3D surround sound.
  • Matches the CCF to the fitted amplifier / speaker package so the surround system behaves correctly.
  • Requires the corresponding audio hardware to be present; this sets the software configuration and coding — applied over OBD, no parts fitted.

Choose the option that matches your vehicle

Dropdown option What it means
With 3D Surround Audio Configures the system for full 3D surround sound (height channels / immersive surround).
With 2D Surround Audio Configures the system for 2D surround sound.
Without Surround Audio No surround audio — standard stereo configuration.
Use legacy logic to determine Surround Audio fitment Lets the vehicle fall back to its older automatic detection of the fitted audio package rather than a fixed setting.
Not Supported Vehicle / platform does not support this parameter. Do not select.
Error Factory place-holder value — not a real choice, do not select.

Key terms explained

  • Surround Audio (2D / 3D): Multi-channel surround sound. 2D uses speakers around the cabin; 3D adds height/immersive channels for a fuller effect.
  • Legacy logic: The vehicle's older built-in method of auto-detecting which audio package is fitted, used instead of a fixed CCF value.
  • CCF (Car Configuration File): The master list of feature flags stored in the vehicle. Setting a value here switches a factory feature on or off. All of these activations are done by editing the CCF, not by fitting parts.
  • As-Built: Your vehicle's original factory configuration record, tied to the VIN. Every change is written back against your As-Built so the car stays consistent with JLR records.
  • Coded to your VIN: The change is applied to your specific vehicle over the OBD diagnostic port — remote and mobile, no bench work and no new hardware.
  • Error / Undefined: Factory enumeration place-holders that exist inside the parameter list. They are not real choices — do not select them. Pick the plain-English option that matches your vehicle.

The CCF parameters behind the 3D Surround Camera

The dropdown above maps to these values in the Car Configuration File:

CCF address Parameter Block Byte Bits Values (from the CCF data set)
0x6D47 CameraSensorFitment 0x6D 4 7–4 01 = not fitted, 02 = Rear, 03 = Surround, 04 = Rear + Night Vision, 05 = Surround + Night Vision.
0x1E57 FRONT CAMERA 0x1E 5 7–0 01 = without front camera, 02 = single front camera, 03 = dual front cameras, 04 = front camera/s with Cross Traffic Alert.
0x2047 SIDE CAMERA 0x20 4 7–0 01 = without, 02 = right side, 03 = left side, 04 = both sides, 05 = both sides with Japanese functionality.
0x3040 Parking Camera / Rear View Camera 0x30 4 0 00 = not fitted, 01 = fitted.
0x4122 CameraHMIStrategy 0x41 2 2–0 01 = HMI hosted by Infotainment, 02 = HMI hosted by Camera System, 03 = shared HMI.
0x5E77 CleanSurroundCams 0x5E 7 7–5 01 = no clean-camera, 03/04 = independent rear-camera wash, 05 = front and rear camera wash.
0x6D61 DAMLCamera (Drive Assistance Camera menu) 0x6D 6 1–0 01 = category hidden on infotainment, 02 = category displayed.

This is a camera feature. We only switch on what your car can physically do — the camera and its wiring must be fitted. We read your As-Built first; software cannot add a camera that is not there.

The Surround Camera System on Jaguar Land Rover — 2013 to 2026

Earliest model year the system existed on each line:

Model Platform Model years Notes
Range Rover / Range Rover Sport L405 / L494 2013–2022 Surround Camera System (four cameras, bird’s-eye view, off-road and trailer modes) from the 2013 launch as a premium option.
Range Rover Evoque / Discovery Sport L538 / L550 2015–2026 Surround Camera on cars with the four-camera set.
Discovery L462 2017–2026 Surround Camera with ClearSight Ground View.
Defender / Range Rover / Range Rover Sport L663 / L460 / L461 2020–2026 3D Surround Camera and ClearSight Ground View on the Pivi Pro cars.

Earliest model year the system existed on each line; it needs the four surround cameras fitted. We confirm by VIN.

Two ways we switch this on — both remote, no parts

Depending on model year and architecture, the 3D Surround Camera is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.

  • CCF editing over OBD — on cars that carry the four surround cameras we set the camera-fitment and HMI flags above in the Car Configuration File, write them back against your As-Built, then re-configure the camera and infotainment modules so the bird’s-eye view, side cameras and ground view display.
  • OEM-tool online configuration — where the module holding the flag needs its configuration re-issued from the manufacturer’s programming database rather than a direct CCF value, the same result is completed remotely through the OEM diagnostic tool’s online configuration for that module.

Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.