SW263 Parking & Camera Pack

Park Assist Camera enable for Jaguar & Land Rover — switch on the rear/park-assist camera in the correct wiring form (LIN or CAN, standard or FMVSS111). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the camera hardware.

[Sign in to view price]

SW220 – Park Assist Camera:

Ask a question

CODE: SW263

This product is electronically distributed.

Please sign in to buy

Description
Features

What this activation does

Turns on the park-assist / reversing camera so its image appears on the touchscreen when reversing or parking.
Choose the wiring type that matches your car — LIN or CAN, and the FMVSS111 (US regulation) variants where applicable.
Software enable via the CCF — the camera must be fitted. Coded to your VIN / As-Built.

Choose the option that matches your vehicle

Dropdown option	What it means
Not supported	No camera provision — factory place-holder, do not select.
Without Park Assist Camera	Camera off / not fitted.
With Park Assist Camera	Enables the park-assist camera (generic).
With LIN Park Assist Camera	Enables a camera wired on the LIN bus.
With CAN Park Assist Camera	Enables a camera wired on the CAN bus.
With LIN / CAN FMVSS111 Park Assist Camera	Enables the camera with the FMVSS111 (US) reversing-visibility behaviour, on LIN or CAN.
Error	Factory place-holder value — not a real choice, do not select.

Key terms explained

Park Assist Camera: The reversing/parking camera that shows the view behind (and around) the car on the touchscreen.
LIN / CAN: Two in-car wiring networks. The camera must be enabled for the bus it is actually wired to.
FMVSS111: A US safety regulation for rear visibility; the FMVSS111 variants set the camera behaviour required for that market.
CCF (Car Configuration File): The master list of feature flags stored in the vehicle. Setting a value here switches a factory feature on or off. All of these activations are done by editing the CCF, not by fitting parts.
As-Built: Your vehicle's original factory configuration record, tied to the VIN. Every change is written back against your As-Built so the car stays consistent with JLR records.
Coded to your VIN: The change is applied to your specific vehicle over the OBD diagnostic port — remote and mobile, no bench work and no new hardware.
Error / Undefined: Factory enumeration place-holders that exist inside the parameter list. They are not real choices — do not select them. Pick the plain-English option that matches your vehicle.

The CCF parameters behind the Parking & Camera Pack

The dropdown above maps to these values in the Car Configuration File:

CCF address	Parameter	Block	Byte	Bits	Values (from the CCF data set)
0x0947	Parking Assistance	0x09	4	7–0	01 = without, 02 = PDC rear, 03 = PDC front and rear, 04 = PDC 360, 05–0A = PDC with parallel / perpendicular / exit park assist.
0x0F27	Park Assist Camera	0x0F	2	7–0	01 = without, 02 = with camera, 03 = LIN camera, 04 = CAN camera, 05 / 06 = FMVSS111 LIN / CAN camera.
0x7133	Park Assist (automated)	0x71	3	3–0	01 = not fitted, 02 = semi-auto with automated steering, 03 = fully automated park assist, 04 = fully automated plus remote.
0x1E57	Front Camera	0x1E	5	7–0	01 = without, 02 = single front camera, 03 = dual front cameras, 04 = front camera with cross-traffic alert.
0x2047	Side Camera	0x20	4	7–0	01 = without, 02 = right, 03 = left, 04 = both sides, 05 = both sides with Japanese functionality.
0x3343	Parking Aid Display	0x33	4	3–0	01 = none, 02 = textual, 03 = graphical surround display.

The Parking & Camera Pack groups the parking-sensor and camera options — front and rear PDC, 360 surround view, park-assist cameras and automated park assist. Each needs the matching sensors and cameras fitted. Where the hardware is present but an option was never enabled we switch it on; software cannot add a sensor or camera that is not fitted — we check your As-Built first and set only the options your car carries.

The Parking & Camera Pack on Jaguar Land Rover — 2013 to 2026

Earliest model year the options existed on each line:

Model	Platform	Model years	Notes
Range Rover / Range Rover Sport	L405 / L494	2013–2022	PDC, surround cameras and park assist where the sensors and cameras are fitted.
Land Rover Discovery / Defender	L462 / L663	2017–2026	Parking and camera options on the current Land Rover lines.
Range Rover / Range Rover Sport	L460 / L461	2022–2026	Parking and camera options on the current platforms.

Earliest model year these options existed on each line; each needs the sensor and camera hardware fitted. We confirm by VIN.

Two ways we switch this on — both remote, no parts

Depending on model year and architecture, the Parking & Camera Pack is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.

CCF editing over OBD — on cars that carry the parking sensors and cameras we set the parking and camera values above in the Car Configuration File, write them back against your As-Built, then re-configure the park-assist and camera modules so the sensors, surround view and automated park assist work.
OEM-tool online configuration — where the module holding the flag needs its configuration re-issued from the manufacturer’s programming database rather than a direct CCF value, the same result is completed remotely through the OEM diagnostic tool’s online configuration for that module.

Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.

Activation Type:

ADAS & Driver Assist

JLR Model / Generation: