Front Fog Lights enable for Jaguar & Land Rover — switch on the front fog lamps on cars that have the hardware but a disabled config, giving the low, wide beam that cuts through fog, heavy rain and snow, operated from the light stalk. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.
| Dropdown option | What it means |
|---|---|
| Enable front fogs | Turns on the front fog lamps and their stalk control — select this to activate the fitted fogs. |
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x6973 | Front Fog Lights | 0x69 | 7 | 3–2 | 01 = not fitted, 02 = fitted. |
| 0x3E70 | Front Fog Enable | 0x3E | 7 | 0 | 00 = off, 01 = on. |
| 0x0357 | Fog Light Function | 0x03 | 5 | 7–0 | 01 = without, 02 = unrestricted, 03 = not with high beam, 04 = front only. |
| 0x7085 | Front Fog Functionality | 0x70 | 8 | 5–3 | 02 = fog with SBL, 03 = fog with cornering lamp, 04 = fog / SBL / CL, 06 = fog / AFS / SBL / CL. |
The Front Fog Lights option enables the front fog lamps and their cornering functions. It needs the fog lamps fitted to the bumper. Where the lamps are present but disabled we switch them on; software cannot add fog lamps that are not fitted — we check your As-Built first and set only what your car carries.
Earliest model year the options existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | Front fog and cornering functions where the lamps are fitted. |
| Land Rover Discovery / Defender | L462 / L663 | 2017–2026 | Fog lamp functions on the current Land Rover lines. |
| Range Rover / Range Rover Sport | L460 / L461 | 2022–2026 | Fog light options on the current platforms. |
Earliest model year front fogs existed on each line; needs the fog lamps fitted. We confirm by VIN.
Depending on model year and architecture, the Front Fog Lights is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()