Park Assist / Rear-View Camera for Jaguar & Land Rover — activate the reversing camera and its guidance display, choosing the LIN or CAN wiring type to match your hardware. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.
| Dropdown option | What it means |
|---|---|
| With Park Assist Camera | Enables the reversing camera (generic configuration). |
| With LIN Park Assist Camera | Enables a reversing camera that communicates over the LIN bus — choose to match LIN-wired hardware. |
| With CAN Park Assist Camera | Enables a reversing camera that communicates over the CAN network — choose to match CAN-wired hardware. |
| With LIN FMVSS111 Park Assist Camera | LIN camera configured to the US FMVSS111 rear-visibility standard (extended rear-view behaviour). |
| With CAN FMVSS111 Park Assist Camera | CAN camera configured to the US FMVSS111 rear-visibility standard. |
| Without Park Assist Camera | Disables the reversing camera. |
| Not supported | Vehicle / platform does not support this parameter. Do not select. |
| Error | Factory place-holder value — not a real choice, do not select. |
The dropdown above maps to these values in the Car Configuration File:
| CCF address | Parameter | Block | Byte | Bits | Values (from the CCF data set) |
|---|---|---|---|---|---|
| 0x0F27 | PARK ASSIST CAMERA | 0x0F | 2 | 7–0 | 01 = without, 02 = with Park Assist Camera, 03 = LIN, 04 = CAN, 05 = LIN FMVSS111, 06 = CAN FMVSS111. |
| 0x5683 | PDC (park distance channels) | 0x56 | 8 | 3–0 | 01 = not fitted, 02 = four channel, 03 = eight channel, 04 = 10 channel (Parallel Park Assist), 05 = 12 channel (Parallel and Perpendicular Park Assist). |
| 0x2A83 | PDC (legacy channel count) | 0x2A | 8 | 3–0 | 01 = four channel, 02 = eight channel, 03 = not fitted, 04 = 10 channel (Park Assist). |
| 0x6D43 | UltrasonicSensorFit | 0x6D | 4 | 3–0 | 01 = not fitted, 02 = Rear, 03 = Rear + Front, 05 = Rear Front Flank, 06 = Rear Front + Wade, 08 = Rear Front Flank + Wade. |
| 0x1487 | PDCAutoActivationMenu | 0x14 | 8 | 7–0 | 01 = menu not fitted, 02 = menu fitted. |
| 0x4382 | PDCAutoActivation | 0x43 | 8 | 2–0 | 01 = default ON configurable, 02 = default OFF configurable, 03 = default ON fixed, 04 = default OFF fixed. |
| 0x4841 | PDCBtnFCIM (park-aid button) | 0x48 | 4 | 1–0 | 01 = not fitted, 02 = fitted. |
Park Assist needs the ultrasonic sensor ring (and the camera for the camera-guided view) physically fitted. We read your As-Built and only enable the channels and guidance the car actually carries.
Earliest model year the system existed on each line:
| Model | Platform | Model years | Notes |
|---|---|---|---|
| Range Rover / Range Rover Sport | L405 / L494 | 2013–2022 | Park Assist (guided parallel parking) with the ultrasonic ring; Parallel and Perpendicular Park Assist on the 10/12-channel cars. |
| Range Rover Evoque / Discovery Sport | L538 / L550 | 2012–2026 | Park Assist on cars with the sensor ring. |
| Discovery | L462 | 2017–2026 | Park Assist across the range. |
| Defender / Range Rover / Range Rover Sport | L663 / L460 / L461 | 2020–2026 | Park Assist with the camera-guided view on Pivi Pro cars. |
Earliest model year the system existed on each line; it needs the ultrasonic sensors fitted. We confirm by VIN.
Depending on model year and architecture, Park Assist and the parking aid is enabled by one of two methods. We pick the correct one for your VIN — you do not need to know which in advance.
Either route is performed over the OBD diagnostic port, remote and mobile, with no bench work and no parts. The change is reversible the same way.
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()