Cart is empty


| Key type | OEM Land Rover PEPSFOB (with UWB) — fixed ID, programmed as a new key |
| Transponder | NCF29A4V (NCF29A4VHN marking), 315 MHz remote |
| Works on | RFA vehicles 2017 to 2026 — RFA families JPLA / K8D2 / J9C3 / M9R3, 1-plug, 2-plug and 3-plug RFA |
| What the car does | door-handle keyless entry, key button and keyless start — emergency start and remote as normal |
| Programming | Over OBD with HW04 (RFA + BCM), or in the RFA EEPROM dump on the bench; new-RFA programming over DoIP / Topix Cloud Diagnostic Agent or HW04 |
| Control module | RFA (Remote Function Actuator) |


| Car state | How to add this key | Where |
|---|---|---|
| RFA unlocked (any car 2017–2026) | Learn this key directly over OBD with HW04 — any package A, A+, B, C, C+. Nothing to change in the car first. | OBD |
| RFA locked, EVA2 2021+ | Add without unlocking: On supported locked EVA2, SW30 can learn this compatible fixed-ID key over OBD when RFA Check Keys detects two working keys together, or active service mode is enabled. Confirm frequency, module and vehicle/UWB compatibility. Stored key slots or possession of two fobs are not detection. This adds keys without erasing existing keys or unlocking the RFA. Other supported routes: unlock the RFA with SW40 then learn this key (after the unlock you can also erase the old keys and program new keys into the RFA and BCM, no parts swapped); or fit a new RFA and adapt it (package B or C) — works even with a locked BCM. Unlocking the RFA (EVA2 only): with no keys made you can unlock over CAN; with 2 working keys, over OBD. Exception — Phase 4 ‘telematics protection plus’ cars: only unlock with 2 working keys the car can see, and they must be real OEM UWB keys like this one — with no keys, fit a new RFA. | OBD |
| RFA locked, EVA1 (2017–2020) | This fixed-ID key cannot be added to a locked RFA. To fit this key: replace the RFA with a new unlocked one, program it as new over OBD with HW04 (SW27 unlocked BCM / SW28 locked BCM, SW38 if the software is too high), then add this key to the new RFA (package B or C; works even with a locked BCM). Alternative without changing the RFA: copy the existing key onto a HW13 (433 MHz) / HW14 (315 MHz) change-ID key with SW36 + HW03-C — the copy gives door-handle keyless, key button and keyless start; only walk-away lock / unlock is missing. | Replace RFA |
| RFA dump on the bench (HW04) | With the HW04 tool (SW01–SW15 functions; HW01 also runs them). RFA unlocked: read the RFA SPC560B MCU DFLASH dump, add this key with SW13 (new key) or SW14 (used / locked key) and write it back. RFA locked: unlock the dump first, then add this key. Remote and start work — no emergency start this way. | Bench |
| Copy an existing key onto this key | Not possible — this is a fixed-ID key, nothing can be copied onto it (no SW35, SW36 or key-to-key). For copy / duplicate jobs use the HW13 (433 MHz) or HW14 (315 MHz) change-ID keys. | Not possible |
All models covered 2017+ with the same type of key shape as pictured — Land Rover Defender L663 (2020+), Discovery 5 L462 (2017+), Discovery Sport L550 (2018+), Range Rover Sport L494 (2018+), Range Rover Velar L560 (2017+), Range Rover Evoque L551 (2019+), Range Rover L405 (2018+) and Jaguar XE X750 (2020+).
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()