Lock50 TAGPro HW02 Transponder Emulator Hitag Pro

The video displays the Lock50 TagPro application interface, specifically the JLR Keymaker and Key Production sections. A file browser opens, and a file named 'immo-motorola-4-term-old-style.bin' is selected. The software recognizes it as a 'MOTOROLA Pegas binary' from a 'Landrover immobilizer module', showing key positions as all zeros. The 'JLR Keymaker Module' window appears, and the same binary file is opened again. The recognition is successful, displaying 'Key 0: 2FF3D182' and others as zero. The user clicks 'Check Key', which initially fails with 'This key not belong to the car.' but then shows 'Writing Key... Authentication complete successfully. Key ready to start the car.' A 'Copy Key' function is initiated, selecting Key 0, and upon clicking 'OK', it reports 'Writing Key... Done. Authentication complete successfully. Key ready to start the car.', with Key 0 ID as 2FF3D182. The user then navigates to the 'Transponder Tag Tool', where data is read, and an operation is completed successfully. An 'Authentication Successful' message appears after checking authentication on specific data segments. The 'Make Key Copy' process is repeated, successfully copying Key 0 (ID 2FF3D182) and confirming it's ready to start the car. The video then shows the process again with a different binary file, 'sflash-epc-motorola-4-term-types.bin', recognized as 'EPC IMMO KEY SYSTEM SIM MODULE'. An initial 'Check Key' fails due to the key not belonging to the car, but after 'Copy Key' for Key 0 (ID 6D515403), it's successful and ready to start. Repeated successful 'Check Key' and 'Copy Key' operations for Key 0 (ID 6D515403) are shown, along with successful read/write operations and authentication checks in the Transponder Tag Tool.