HW03-D OBD Dual CAN Cable 2010 - 2024+ Vehicles

HW03D OBD Lock50

[Sign in to view price]
HW03D OBD Lock50
Please sign in to buy
HW03-D — JLR Dual-CAN OBD Diagnostic Cable
The CAN-bus OBD cable for the Lock50 HW04 tool. Covers every CAN job from SW20 up to SW35 — diagnostics, VIN/module programming, CCF, key add/remove and key duplication over OBD.
Dual-CAN JLR 2006-2024+ OBD plug-and-play Works with HW04
Tool compatibility
HW04-A / HW04-A+ use the CAN cable (HW03-D) only. HW04-B or higher can also use the HW03-E DoIP cable.

Which cable do I need?

Job Cable needed
Add keys — KVM or RFA already unlocked HW03-D (CAN)
Add keys — RFA locked on EVA2 models HW03-D (CAN)
Add keys — locked RFA using service mode or with 2 working keys HW03-D (CAN)
IPC reset — all models HW03-D (CAN)
Replace / swap RFA & program — BCM unlocked HW03-D (CAN)
Replace / swap RFA — BCM locked (needs IPCB, SW28) HW03-E DoIP
IPCB — new-RFA adapt on locked BCM (always DoIP) HW03-E DoIP
TCU / Telematics — before 2017 HW03-D (CAN)
TCU / Telematics — 2017 and after (DoIP-only) HW03-E DoIP

Software that runs over this cable (SW20 → SW35)

Modules reached over CAN

Module MCU / part
BCM DPLA / FK72 / HPLA
KVM / RFA J9C3 / JPLA / K8D2 / M9R3
Need DoIP instead?
The HW03-D CAN cable adds keys when the KVM/RFA is unlocked, when the RFA is locked on EVA2 models, and on a locked RFA using service mode or 2 working keys. IPC reset also runs over the CAN cable on all models. But the IPCB always needs the HW03-E DoIP cable — the IPCB gateway and 2017+ TCU/telematics are DoIP-only, so replacing / swapping the RFA on a locked BCM (SW28) uses the E cable (HW04-B or higher).
This cable is included in the HW03-CB bench adapter kit (CAN path). All software above requires the Lock50 HW04 tool.