Only For use when when the RFA or KVM modules is Unlocked.

Lock50 JLR OBD Link Tool HW04-A NO Need To Replace Unlocked RFA BCM & Add Remove Keys in Under 60 Seconds TO 24+

2024 January saw the World Fast JLR Key Programming Tool in Action.

This Programmer is Used to Add keys in to Latest PEPS/UWB Vehicles when the RFA Module is Unlocked.  This is Mostly for the USA Market and allows adding keys via OBD in 2017 to 2024 + PEPS system Vehicles.

Support for 2010 to 2021 Older keys will be added soon as a Free Upgrade for All.

in June 2024 We added Upgrades that can be added the HW04-A Package with function from the HW04-B Packages.

HW04 OBD Tool Modules Upgrades for HW04-A

•  https://lock50.co.uk/lock50-to...              Add ther HW01 JLR Key Tool to Support JLR Key Tool Function

• HW04-A Package Functions
 
• HW04-A Upgrade Options

We supply all the Range of tools from 2006 to now.

We'll start with 2006 cars. Yeah, all the way to around 20 red Jaguars and 17 red Range Rovers. That uses software called SDD which is the dealer software. This supports unlimited flashing, unlimited programming and diagnostics. 

The one next is Pathfinder for  17 to 22 Reg in the Pathfinder software that does the flashing programming, coding as well in DTC clearing.

Then we've got the topic software which works on the topic's cloud online and with that you have an authorized account. The account that you've probably applied for is an independent, let's go to about 21 Reg cars. If you were doing BCM replacement or a KVM replacement or a telematics replacement security module, anything like this, you can't do it on those accounts.

You have to have a special authorized account from the factory or a high level account that we're supplying you with you.

This is what the Dealer Supplies  and same. 

HW25  433  or HW26  315 Mhz Original  Keys with UWB.

We Reccomend use these keys when you change RFA or Add Oem keys  for your clients.

If you use this keys then the dealer can update BCM softwares and the keys are never Affected.

OEM HW25 LAND ROVER JLR NCF29A1 PEPS UWB KEY ORIGINAL 433 Mhz

HW13  433 Mhz and  HW14 315 Mhz

These are new type 2017 + keys to use with new type RFA Models with ST SPC MCU.

These have NCF29A1 Mcu and can also have change ID Supported.

These keys  are programmed as PEPS keys  but do not have the UWB/ PEPS parts inside then.

They can be used with Lock 50 Tools in few Ways.

JLR Key Tool HW01  or New Design OBD Tool with HW01 built inside it you can do the following .

• Use 2017 + RFA Mcu Dump and use to Copy keys  from Dflash  and have Remote RF + emergency start Supported
• Use  Key to Key Copy without Car or Mcu files needed when Key being copied is Unlocked then Remote RF + emergency start Supported
• Use with HW04-C to Copy Advanced Key Duplicator 2017 to 2024+ and have Remote RF + emergency start Supported + Keyless

Now RF + Keyless functions was added to the Lock50 Key Emaultors with Change ID.

HW05  + HW06 are Highest Grade Keys found in the World.

HW07 to HW10  are OEM Orignal Keys with Added Lock50 Magic of Change ID

HW13 + HW14 are Highest Grade 2017 to 24+ Change ID Keys.

Now with the new keys in your Tool kit you can do more than ever before as keyless and remote  functions are supported now.

Now you can use the HW05 to HW10  Keys to do Same as  HW02  but  can use Keyless and RF remote functions after  Key copy from File or   copy  Key to Key  for Keys with Chrome Strip  with PCF7953 Mcu.

Now you can use the HW13 + HW14  Keys that add RF Support  and Emergency Start from File Key Copy.   So if you Alarm was on with New type ST SPC Mcu you can now read  rfa file and  have 2 options. 

Use HW013 or HW14 keys and have emergnecy start supported + RF and can press button on key to turn off Alarm or can use Emrgency start

Lock50 Change ID HW06 JLR Key 315 Mhz

After Making the HW01 Key Reader tool  then its was required to make Emulator where the ID can be changed and you can now copy from mcu dumps on to the HW02 Emulator Lock50 to make a working key from the Keyless modules files. 

Not only that this Key emualtor can be resused and unlocked and rewritten unlimited times by the users and was first in the world.

That was not enough and this PCF7953  normally can work only  for the  2010 to 2017  KVM system.

But Lock50 team made it so data can still be written to it for later RFA 2017 to 2024+ and can work also as a 29A1 Mcu for emergency start so the same keys can be used 2010 to 2024+  

HW02 has only Emergency Start Supported Only and  Missing in HW02 was the RF and Keyless Function  and this was solved in the Later Lock50 Keys. HW05 to HW10   and  HW13/HW14   

Lock50 HW02 Transponder Emulator Hitag Pro Emergency Start Supported 2010 to 2023

https://lock50.co.uk/home/lock...

Lock50 Team Work only on the JLR Brand and are Fully Focussed to Deliver a World Class Tool that Goes much further than anyone has ever gone.

Our passion to make life simpler for the world for JLR Programming.

Some history of Lock50

This was out first Tool to Be Launched know as the HW01 Device

You can Read JLR Keys on the Reader and the Tool was first to Copy the Hitag Pro Keys via Mcu Dump using the Dflash to make Keys from File Copy and can use the Following Keys for Special Operations.

https://lock50.co.uk/lock50-mo...

Sw01 to SW14  Functions Come Built in 

Main functions 

2010 to 2024   KVM  + RFA MCU dump Key Add new ID keys in Files 

2010 to 2024   KVM  + RFA MCU dump Key Copy Same ID keys in Files on to Lock50 Keys

2017 to 2024   RFA MCU dump Key Copy Same ID keys in Files on to Lock50 Keys

Also Can Copy Key to Key  without Vehicle  or plugging to OBD

You Tool can Look Like the Above have These Functions 

HW01  The Original Standalone Key Tool  

HW01 V2 The Original Standalone Key Tool  

HW04 New Design OBD Tool also has the older HW01 Inside it and place your key on top of the HW04

So if you have Either of the Tool Connected the Functions are Supported.

Lock50 HW01 Key Copy Tool Packages

Lock50 HW01 JLR Transponder Key Copy & Unlocking & Change ID Emulator Programming Tool 2010 to 2024+

Use JLR Pathfinder Here and good Laptop like this CF53 

https://lock50.co.uk/home/hw131-jlr-software-pathfinder/

https://lock50.co.uk/genuine-d...

https://lock50.co.uk/genuine-d...

https://lock50.co.uk/genuine-d...

Use JLR SDD Here and good Laptop like this CF53 

https://lock50.co.uk/genuine-d...

https://lock50.co.uk/genuine-d...

https://lock50.co.uk/genuine-d...

https://lock50.co.uk/genuine-d...

For Cars with Unlocked RFA we have 1 click UWB OFF can do for PEPS cars 2017 to 24+ all models As you know when keys are lost and the RFA module is locked so far only been posssible to make key copy via obd to 2017 to 2020 without keyless supported.
JPLA mostly all to this year and K8D2 only early ones it was possible via obd to make a key copy of exisitng keys in the RFA for a long time now.
The Draw back for this was only Remote and Emergency Start work.
The BCM and RFA both has UWB setting inside them.
When the RFA is unlocked and in the BCM CCF data UWB off is done then keyless can work.
IF the RFA is locked like cars outside USA then Keyless can never work even if you do BCM CCF edit to make the UWB OFF

This is why others are selling emulator for UWB that will need be soldered in to RFA wires. But note after laters software updates this way is blocked and can use only in older systems and is long winded way.
Another issue when you use this method is after 2020 to 2022 is that the older way to read isk is also blocked now and the other tools will change the ISK in the RFA and if you did a spare key the clients old OEM key cannot added back to the car and the new key done lacks emergency start.

So far so far to deliver a Keyless key with RF and emergency start without installing UWB Emulators and is why Lock50 was created as no one has fully done these models in the world up to now and no promises from any others has come forward to make claim to this up to execpt Lock50


1 To offer the Complete working keys with keyless in a Locked BCM and Locked RFA Vehicle only Lock50 have promised this for far in the World using HW13/HW14 Change id keys 2017 to 24+ all PEPS systems
2 Offer to Add inside Locked RFA 22+ cars new Key id to RFA and BCM without RFA changes.

Lock50 HW04 with  Alarm OFF Can wires 1 Button Alarm off under 60 seconds.

You need to have this function Purchased Seperate fro HW04-A

HW04-B  or HW04-C come with this function included does not require any upgrade purchases.

The Following Video shows the way use the Key to Key Copy Functions 

You can Use a Faulty non working key and Read on the Lock50 HW01 and then Clone on to a New key  like the 433 Mhz  HW05  and  315Mhz HW06 Keys.

Or you can Simply Copy other Brand Change id keys on to the higher Grade and Higher Security Lock50 Range of Keys.

Lock50 HW05 and HW06 keys like OEM Quality and much Longer lasting and Durable.

Lock50 HW07 to HW10 keys OEM Original keys of the Highest Quality and much Longer lasting and Durable and the Case as well as the PCB is Original.

What's the JLR RFA.KM MCU Dump Files to Key Copy function do ?

HW01 is one time purchase and  use forever.

No yearly cost when use  SW01 to SW13  

However when we make a new update you can optionally buy that update to be applied to you HW01   and still has no yearly fees  and is unlimited use.

Look soon for new updates to new functions you can pay to update to  if you wish on top if the SW01 to S13 fucntion it comes with as standard

Programming Keys for Cars can be Done with the Following Dealer and non Dealer tool  we supply.

SDD for 2010 to 2017 Models  

Pathfinder for 2017 to 2020 Models

Topix Cloud  Independant Account   

Lock50 HW04A B or C  

Demo How to Open and read RFA and Generate keys and use emergency start using HW01 and the Lock50 Unlimited Use emulator Keys that come with the Kit as standard.

Lock50 keys like the HW02 and HW05 to 10   are Dual Nationality keys.

This means they can work as PCF7953 and NCF 29A1 Transponders.

For PCF7953 Keys 2010 to 2020 you can Copy Direct Keys to Key or MCU RFA dumps and get Full keyless and Remote and Emergency Start .

For PCF7953 Keys 2010 to 2020 you can Copy Direct Keys to Key or MCU RFA dumps but with Emergency Start Only no Remote.

Lock50 HW01 is Designed and conceptualised in the UK at the Oliveston Ltd Head Offices.

Oliveston Ltd known for supplying JLR Dealer Tools and Softwares around the World with High Level Of Support and with a client base  spanning 200  Countries with over 2000 OEM Dealer Tools supplied to Locksmiths and Garage and workshop owners.

Since 2015  Oliveston Ltd built up Great Expertise in this field and started to looking in to ways where their clients can save  a lot of time and  money and solve many  jobs without having to replace the  Modules in the Cars New Parts.

BCM   RFA  TCU   are main security components in the Vehicles and are highly Time consuming to swap and remove and then even more costly to replace with new ones and then  even much more time is needed to program with special tools and logins.

We found ways where our clients can  avoid these  Complications and  do less Manual work and  have higher profits margins in the end be able to have Peace in Life and able to have Quality time for themselves and their Families.

Oliveston Ltd is a Technology company and Design Team do not like to make something that is already available and only offer new Services or products not available before in the world and not easily conceptualised without a vast amount of Experience and Expertises.

The HW01 is a Hitag Pro transponder Programmer.

These Hitag Prog NXP based Transponder Chips are used in the JLR Vehicles from 2010 to 2023+

You Have Functions to the Following 

• Read Car Keys  Info
• Copy Car Keys  Direct Key to Key   without OBD Programming
• Copy Car Keys  Direct Mcu RFA Dump files to Key  without OBD Programming
• Emulate JLR Car Keys  
• Increases Security of Existing Car keys once Cloned on to the Lock50 Keys.
• Lock50 Keys Protect the Secret Data from Being Read in Lock50 Keys by other Tools.
• Lock50 HW01 can work with HW04 Link tools to work in Together to program keys in the Latest Models and old.

Note  

The Lock50 HW04 New OBD tools also contain the HW01 inside of them so  now u only need to connect the New tool to just 1 usb port 

The Following Video shows the way use the Key to Key Copy Functions 

You can Use a Faulty non working key and Read on the Lock50 HW01 and then Clone on to a New key  like the 433 Mhz  HW05  and  315Mhz HW06 Keys.

Or you can Simply Copy other Brand Change id keys on to the higher Grade and Higher Security Lock50 Range of Keys.

Lock50 HW05 and HW06 keys like OEM Quality and much Longer lasting and Durable.

Lock50 HW07 to HW10 keys OEM Original keys of the Highest Quality and much Longer lasting and Durable and the Case as well as the PCB is Original.

You can also use the JLR Key Tool to copy keys from KVM or RFA Mcu Dumps.

Demo How to use the JLR Dump tool to Precode Keys from 2010 to 2024 Using KVM RFA Dumps Lock50 HW01 To Alarm off for USA

What's the JLR RFA.KM MCU Dump Files to Key Copy function do ?

Demo How to Open and read RFA and Generate keys and use emergency start using HW01 and the Lock50 Unlimited Use emulator Keys that come with the Kit as standard.

Lock50 keys like the HW02 and HW05/HW06  to 10   are Dual Nationality keys.

This means they can work as PCF7953 and NCF 29A1 Transponders.

For PCF7953 Keys 2010 to 2020 you can Copy Direct Keys to Key or MCU RFA dumps and get Full keyless and Remote and Emergency Start .

For 2017+ to  24+  PEPS RfA types you can Copy  MCU RFA dumps with Emergency Start  on to HW05/HW06  keys or if you use the HW13/HW14  keys then you also have remote function working from mcu dump copy.

No

All we supply is  where you have the finger on the pulse.

All system work when need them to work any time u need them to work.

any problem and you contact us via email via the shopping cart for support or  

purchase  realtime support  via whatsapp .

With other Tool Previously some clients have always had to contact othes for programming options.

No.  We offer unlimited programming for the Time you for the Licence from us for.

No need contact us unless your stuck   with anything.  Anytime you can do your own module flashing and  programming new modules  without contacting anyone.

Dealer tools can use only new parts with no Vins inside  and adapt.

However check Lock50 hw04  as that let you reuse parts from breakers and fix the VIN  in the modules without having to open the Modules.