SW09 - SW09 - Module Copy Key via MCU Dumps for KVM 9S12XEP100 on HW05 to HW10 Emulators with RF & Keyless + Emergency start

SW09 - SW09 - Module Copy Key via MCU Dumps for KVM 9S12XEP100 on HW05 to HW10 Emulators with RF & Keyless + Emergency start

SW-09 Is a sofware licence that works with the LOCK 50 TAG PRO tool HW01 . This software will enable users to add and program new LandRover and Jaguar keys known as Change ID Keys HW05 to HW10 and can be found here

The SW03 is Similar but with that you can only add Fixed ID Keys like in postion 3 or higher and must write back the MCU Dump to the MCU for KVM with 9S12XEP100

Here simply load the files Eeprom and Dflash & be able to copy exisiting keys ID postion 1 or 2 or Both on to the Change ID Keys and can be found here

With the SW09 its now possible to use slots 1 and 2 and be able to emulate them with HW02 for Emergency start only or with the RKE Keyless Functions as normal HW05 to HW10 Emulator keys.

This will mean for Cars that have TCU  fitted and when u add keys to mcu  dump the key info is missing in the BCM  and TCU.

When u add keys via dump on these model with TCU  only RF open close can work.

however when  use the Copy option from the dump  its possible to make copy of existing keys info in the KVM and then all works  when u use HW05 to HW10 Lock50 Keys and can use emergency start Keyless and Remote functions for 2015 to 2020 higher secueitry models with TCU fitted.

Use Lock50 keys like HW05 and HW06

Or You Can can Supply Original OEM Keys to clients when you use the  HW07 HW08 HW09 HW10      

Firstly you need to use other devices to read out the D-Flash and EEE data in the KVM.
Then use Lock50 HW01 to generate new key and data on to your choosen Lock50 emulators &  finally NO NEED TO wirte back to KVM new files as  with SW09 as this does not add keys like the SW03 but only Emulates Exisitng Keys with full function that are present in the files.

Using Lock50 HW01 and our Lock50 Keys  that  emulate an existing key info from the data you have extracted from an existing KVM 

• Copy the key Via Mcu Dump for RFA onto   HW05 to HW12 Keys to Emergency Start or Use Keyless or Remote
• Firstly you need to use other devices to read out the files in MCU MC9S12XEP100 of KVM
• Then you can use the HW01 Lock50  Key Programmer  to Copy any key in the MCU Dump file
• NO NEED to Write Back new Dump file and you have a Fully working Lock50 Key.
• Note emergency start  is supported  & Remote and Keyless is ok 
• To Overcome the 2015 to 2020 models with TCU   use the Copy option in SW09 to copy Same ID in slot 1 or 2 in KVM.