Cart is empty
HW27 CTO key — Supported years: 2022–2027+ — 2022, 2023, 2024, 2025, 2026, 2027+.



| Key type | OEM Land Rover PEPSFOB (with UWB) walk-away — fixed ID, programmed as a new key |
| Transponder | NCF29AFV (NCF29AFVHN marking), 433 MHz remote |
| Works on | RFA vehicles 2022–2027+ — RFA families JPLA / K8D2 / J9C3 / M9R3, 1-plug, 2-plug and 3-plug RFA |
| What the car does | door-handle keyless entry, key button, keyless start and walk-away lock / unlock — emergency start and remote as normal |
| Programming | Over OBD with HW04 (RFA + BCM), or in the RFA EEPROM dump on the bench; new-RFA programming over DoIP / Topix Cloud Diagnostic Agent or HW04 |
| Control module | RFA (Remote Function Actuator) |


| Car state | How to add this key | Where |
|---|---|---|
| RFA unlocked (any car 2022–2027+) | Learn this key directly over OBD with HW04 — any package A+ to C+. Nothing to change in the car first. | OBD |
| RFA locked, EVA2 2021+ | Add without unlocking: SW30 adds any key type suitable for the vehicle over OBD, including OEM and non-OEM keys. On locked EVA2, it requires two working keys detected by the vehicle or active service mode. It adds keys without erasing existing keys or unlocking the RFA. Place both keys inside the car at the same time and run RFA Check Keys. Confirm that the vehicle detects two keys; owning two fobs or seeing two stored key slots is not enough. Unlock or replace: unlock the RFA with SW40 then learn this key (after the unlock you can also erase the old keys and program new keys into the RFA and BCM, no parts swapped); or fit a new RFA and adapt it (package B or C) — works even with a locked BCM. SW40 unlock eligibility: Telematics Phase 4 Plus: SW40 cannot unlock the RFA over OBD or CAN wires unless Check Keys detects two keys together inside the car. Run Check Keys before choosing the unlock route. Service mode is an alternative for SW30 add-key, not a substitute for this SW40 two-key requirement. The existing 0/1-key CAN-wires route applies only to supported EVA2 vehicles without Telematics Phase 4 Plus; it does not bypass the Phase 4 Plus two-key requirement. | OBD |
| RFA locked, EVA1 (2017–2020) | This fixed-ID key cannot be added to a locked RFA. To fit this key: replace the RFA with a new unlocked one, program it as new over OBD with HW04 (SW27 unlocked BCM / SW28 locked BCM, SW38 if the software is too high), then add this key to the new RFA (package B or C; works even with a locked BCM). Alternative without changing the RFA: copy the existing key onto a HW13 (433 MHz) / HW14 (315 MHz) change-ID key with SW36 + HW03-C — the copy gives door-handle keyless, key button and keyless start; only walk-away lock / unlock is missing. | Replace RFA |
| RFA dump on the bench (HW04) | With the HW04 tool (SW01–SW15 functions; HW01 also runs them). RFA unlocked: read the RFA SPC560B MCU DFLASH dump, add this key with SW13 (new key) or SW14 (used / locked key) and write it back. RFA locked: unlock the dump first, then add this key. Remote and start work — no emergency start this way. | Bench |
| Copy an existing key onto this key | Not possible — this is a fixed-ID key, nothing can be copied onto it (no SW35, SW36 or key-to-key). For copy / duplicate jobs use the HW13 (433 MHz) or HW14 (315 MHz) change-ID keys. HW29 (433 MHz) and HW30 (315 MHz) non-OEM Change-ID keys can also be used via key copying with SW36 to provide walk-away lock / unlock on compatible vehicles. Match the key frequency to the vehicle. | Not possible |
All models covered 2022–2027+ with the same type of key shape as pictured — Land Rover Defender L663 (2022–2027+), Discovery 5 L462 (2022–2027+), Discovery Sport L550 (2022–2027+), Range Rover Sport L494 (2022–2027+), Range Rover Velar L560 (2022–2027+), Range Rover Evoque L551 (2022–2027+), Range Rover L405 (2022–2027+) and Jaguar XE X750 (2022–2027+).
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()