Cart is empty


| Car state | How to add this key | Where |
|---|---|---|
| UWB off + RFA unlocked | Learn this key directly over OBD with HW04 — any package A+ to C+. | OBD |
| UWB on + RFA unlocked | Turn UWB off with 1 Click on HW04, then learn this key over OBD — A+ to C+. | OBD |
| RFA locked, EVA2 2021+ — non-UWB car, 2 keys or service mode | Only when the car is already a non-UWB system. Add this key as key number 3 with SW30 — same function as the original keys. Package A+ to C+. | OBD |
| RFA locked, EVA2 2021+ — no 2 keys and no service mode | Only two ways out: unlock the RFA with SW40 then learn this key (after the unlock you can also erase the old keys and program new keys into the RFA and BCM, no parts swapped); or fit a new RFA and adapt it (package B or C) — works even with a locked BCM, 2017–2026. This is also the route when the car has UWB enabled: turn UWB off after the SW40 unlock, or with the new RFA (1 Click), then learn this key. | OBD |
| RFA locked, EVA1 (2017–2020) | This fixed-ID key cannot be added to a locked RFA. To fit this key: replace the RFA with a new unlocked one, program it as new over OBD with HW04 (SW27 unlocked BCM / SW28 locked BCM, SW38 if the software is too high), then add this key to the new RFA (package B or C; works even with a locked BCM). UWB off with 1 Click over OBD first if the car had UWB — the key then has full function. Alternative without changing the RFA: copy the existing key onto a HW13 (433 MHz) / HW14 (315 MHz) change-ID key. Non-UWB car: over OBD with SW35 + HW03-D. UWB-enabled car: with SW36 + HW03-C — the copy works the same as a PEPSFOB (with UWB) key (door-handle keyless, key button, keyless start); only walk-away lock / unlock is missing. | Replace RFA |
| RFA dump on the bench (HW04) | With the HW04 tool (SW01–SW15 functions; HW01 also runs them). RFA unlocked: read the RFA SPC560B MCU DFLASH dump, add this key with SW13 (new key) or SW14 (used / locked key) and write it back. RFA locked: unlock the dump first, then add this key. Remote and start work — no emergency start this way. | Bench |
| Copy an existing key onto this key | Not possible — this is a fixed-ID key, nothing can be copied onto it (no SW35, SW36 or key-to-key). For copy / duplicate jobs use the HW13 (433 MHz) or HW14 (315 MHz) change-ID keys. | Not possible |
All models covered 2017+ with the same type of key shape as pictured — Land Rover Defender L663 (2020+), Discovery 5 L462 (2017+), Discovery Sport L550 (2018+), Range Rover Sport L494 (2018+), Range Rover Velar L560 (2017+), Range Rover Evoque L551 (2019+), Range Rover L405 (2018+) and Jaguar XE X750 (2020+).
HW20 OEM LOCK50 LAND ROVER NCF29A1 PEPS UWB KEY ORIGINAL 315 Mhz CHANGE-ID 2017 to 2024+ (HW20_OEM-Change-ID-PEPS_315_Mhz_Land_Rover_Logo.png, 485 Kb) [Download]
© 2016 - 2025 Lock50 is a Trademark Owned by Oliveston Ltd
![]()