HW03-A Solder-Free Adapter - Read SPC560B60L3 DFLASH from All Unlocked Land Rover & Jaguar RFA (KVM) IMMO Boxes 2017 to Now via HW53

HW03A ALARM OFF Solder Free Adapter for USA Canada Unlocked Land Rover Jaguar 2017+ TO 24+ KVM (RFA) IMMO boxes
[Sign in to view price]
HW03A ALARM OFF Solder Free Adapter for USA Canada Unlocked
Please sign in to buy
HW03-A — Solder-Free RFA / KVM Reading Adapter
All Land Rover & Jaguar RFA 2017 to now • Unlocked SPC560B60L3 MCU • Reads the DFLASH via the HW53
🔧 No soldering — seat & readReads the SPC560B60L3 MCU DFLASH on the benchAlarm OFF + emergency startAlso loads virgin files after MCU swap

The HW03-A is a solder-free bench adapter for reading the SPC560B60L3 MCU when the RFA is unlocked. It seats the RFA board and connects to the HW53 programmer to extract the DFLASH from all unlocked Land Rover / Jaguar KVM (RFA) IMMO boxes, 2017 to now — any model with the SPC560B60L3 MCU, with no soldering and no pin damage. That is all it does: seat the unlocked RFA, connect to the HW53, read the DFLASH. The extracted file can then be emulated onto a Lock50 key for emergency start with the alarm off, or used for remote open with HW14 keys.

Lock50 HW03-A solder-free adapter for reading the SPC560B60L3 RFA MCU on all unlocked Land Rover and Jaguar KVM RFA IMMO boxes
HW03-A solder-free adapter clipped onto the RFA SPC560B60L3 MCU

Two jobs, one adapter — no soldering

Use What the HW03-A does
1. Read an unlocked RFA Seat the unlocked RFA board on the clip, connect the HW53 and read the SPC560B60L3 DFLASH — all JLR RFA 2017 to now.
2. Load virgin files after an MCU swap When the RFA is locked, replace the SPC560B60L3 with a virgin chip, then use the same clip to load the virgin files onto the new MCU — still no soldering.

What's in the kit

  • HW03-A solder-free reading adapter for the JLR KVM (RFA) IMMO box.
  • Contact/probe interface for the RFA board — no soldering to the MCU.
  • Connects to the HW53 SPC560B60L3 programmer for the actual DFLASH read.

Vehicle compatibility

  • Models & years: all Land Rover & Jaguar RFA from 2017 to now that use the SPC560B60L3 MCU.
  • Requirement: the RFA / KVM must be unlocked — the HW03-A reads the DFLASH solder-free only on an unlocked box.
  • Module: KVM (RFA) IMMO box. MCU: SPC560B60L3.

How the job works, step by step

Step What you do
1 Remove the RFA from the vehicle and open the housing.
2 Seat the RFA board on the HW03-A adapter — no soldering.
3 Read the unlocked SPC560B60L3 MCU DFLASH with the HW53 programmer.
4 Emulate the RFA from the dump with the matching SW function — SW04 (JPLA), SW05 (K8D2), SW07 (M9R3) or SW06 (Jaguar J9C3) — on the HW01 tool or the HW04 Tools.
5 Make a key from the dump — copy the dump onto a Lock50 change-ID emulator key, HW13 (433 MHz) or HW14 (315 MHz), to add keys. This key gives emergency start and remote straight away, and can arm / disarm (alarm off) the car.
6 If the RFA had UWB enabled, the dump key will not do keyless yet. Use HW04 over OBD to turn UWB off in 1 click.
7 With UWB off, the same key made from the dump now works keyless too — full remote, keyless and arm/disarm from the one dump-made key. Bench-copied remote / RF / emergency start covers models up to 2020; later models are synchronised in the car.
HW03-A adapter cable connected to the HW53 programmer reading the SPC560B60L3 RFA MCU DFLASH
HW03-A cable paired with the HW53 programmer to read the MCU DFLASH

Tools you need with the HW03-A

Tool Why you need it
HW53 Bench programmer that performs the solder-free read of the unlocked SPC560B60L3 RFA MCU through the HW03-A.
HW01 Chip tool that emulates the extracted DFLASH file onto a Lock50 key. The HW04 (A to C+) tools can do this as well — emulate the dump and make the key.
HW13 / HW14 Lock50 emulator keys the dump is copied onto to add keys — HW13 (433 MHz) and HW14 (315 MHz). The made key gives remote, emergency start and arm/disarm; keyless too once UWB is turned off.
HW04 (A to C+) All Lock50 HW04 OBD tools, A to C+, can add and remove keys and turn UWB off in 1 click over OBD.

Emulation software for the file you read

Load the RFA module MCU DFLASH you read with the matching function to emulate the RFA and make a key from the dump — RFA module only, never the KVM. All run on the HW01 / HW04 tools. Click any function to open its page in a new tab.

Function What it does
SW01 Read the key first — part, frequency, position, locked status and rewrites left.
SW04 Load the JPLA-19H440 RFA MCU (SPC560B60L3) DFLASH dump — emergency-start emulation.
SW05 Load the K8D2-19H440 RFA MCU (SPC560B60L3) DFLASH dump.
SW07 Load the M9R3-19H440 RFA MCU (SPC560B60L3) DFLASH dump.
SW06 Load the Jaguar J9C3-19H440 RFA MCU (SPC560B60L3) DFLASH dump.

Key-to-key copy (unlocked key)

You do not always need the RFA. If you already have an unlocked working key, you can do a key-to-key copy straight onto a Lock50 HW13 or HW14 change-ID key with the HW01 tool or the HW04 (A to C+) tools — read the unlocked key with SW01 and copy it across to add keys, no bench read of the RFA required.

Notes

  • The RFA must be unlocked to read solder-free with the HW03-A.
  • On a locked RFA you can replace the SPC560B60L3 with a virgin chip and use the same clip to load the virgin files — no soldering.
  • A key made from the dump gives emergency start, remote and arm/disarm (alarm off). If the RFA had UWB enabled, use HW04 over OBD to turn UWB off in 1 click — the same dump-made key then works keyless as well.
  • Reads all JLR RFA from 2017 to now that use the SPC560B60L3 MCU, as long as the box is unlocked.
  • After any bench work the RFA / KVM must be immobilised / synchronised in the car before the vehicle is used.
  • If a working key is unlocked, you can key-to-key copy it onto HW13 / HW14 with HW01 or HW04 (A to C+) — no RFA read needed.

The SPC560B60L3 MCU — we sell the blank chip

Need a virgin chip for the MCU swap on a locked RFA? We sell the HW52 SPC560B60L3 blank MCU — solder it in, then load the virgin files with the same HW03-A clip. Click the chip to open the product page.

HW52 SPC560B60L3 blank virgin MCU we sell for Land Rover Jaguar KVM RFA IMMO box read solder-free with HW03-A
HW52 — the blank SPC560B60L3 MCU we sell (click to open)

New / replacement RFA modules we sell

If the RFA is damaged or you need a brand-new one, we supply new virgin JLR RFA (KVM) PEPS modules ready to program. Pick the module that matches the part you are replacing — click any to open its product page in a new tab.

Module RFA part / notes
HW41 3-plug RFA PEPS — JPLA-19H440-DE (LR099141 / T4K6115).
HW42 2-plug RFA PEPS — JPLA-19H440-BE.
HW43 3-plug RFA PEPS — JPLA-19H440-CE USA (LR099140).
HW44 2-plug RFA PEPS — JPLA-19H440-AE USA (LR099138).
HW45 3-plug RFA PEPS — Jaguar J9C3-19H440-DF (J9C2798).
HW46 2-plug RFA PEPS — Jaguar J9C3-19H440-BF (J9C2798).
HW47 2-plug RFA PEPS — K8D2-19H440-BB (LR117932 / T2H38589).
HW48 2-plug RFA PEPS — K8D2-19H440-BC (LR117932 / T2H38589).
HW49 1-plug RFA PEPS — M9R3-19H440-BD.
HW50 1-plug RFA — K8D2-19H440-AB (J9C2796).
HW51 1-plug RFA — K8D2-19H440-AC (LR117928 / T2H38587).

HW03 Unlocked Programming Clip SPC560B60L3 chip use for Land Rover Jaguar 2017+ KVM (RFA) IMMO box (HW03-clip-SPC-read-no-solder.png, 382 Kb) [Download]