XJ X351 (2010-2019) Activations

Configurable Terrain Response 2 for Jaguar & Land Rover — unlock the full Terrain Response 2 / Auto and add drive-programme options such as Dynamic, Winter and Configurable Dynamic Mode. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Advanced Tow Assist for Jaguar & Land Rover — enable the guided trailer-reversing system that steers the trailer for you using the touchscreen rotary control. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Hill Descent Control for Jaguar & Land Rover — enable the system that holds a steady, controlled speed down steep declines using the brakes, so you can steer without touching the pedals. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Advanced Off-Road Pack for Jaguar & Land Rover — enable the Off-Road Navigation feature that maps and guides you off the road network, part of the advanced off-road tool set. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Blind Spot Assist / Blind Spot Information System (BSIS) for Jaguar & Land Rover — activate the door-mirror warning that alerts you to vehicles hidden in your blind spot, with options for radar or camera systems and rear-traffic detection. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Lane Keep / Lane Departure Warning for Jaguar & Land Rover — activate the Lane Departure Warning (LDW) system, with driver menu and sensitivity options, combined with the matching Traffic Sign Recognition (TSR) state. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Auto High Beam Assist (AHB) for Jaguar & Land Rover — activate automatic main-beam that dips and raises the high beam for you based on oncoming and preceding traffic, with options for where the on/off menu appears and how it combines with Lane Departure / Traffic Sign menus. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Traffic Sign Recognition (TSR) for Jaguar & Land Rover — activate the forward-camera system that reads road signs (mainly speed limits) and shows them in the instrument cluster, with an optional over-speed warning. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Intelligent Emergency Braking (Low-Speed IEB) for Jaguar & Land Rover — activate the autonomous emergency braking that detects an imminent collision and brakes automatically to avoid or reduce an impact, with front and/or rear coverage. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Cruise Steering Assist / Lane Keep Assist (LKA) for Jaguar & Land Rover — activate the active steering support that gently helps keep the car centred in its lane while driving. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Driver Condition Monitor (Driver Drowsiness Monitor) for Jaguar & Land Rover — activate the system that watches your driving inputs for signs of fatigue and prompts you to take a break. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Surround system configuration for Jaguar & Land Rover — set the surround-audio fitment used by the surround-view / multimedia system, from none up to full 3D Surround Audio. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile, no parts required.

Rear View Camera enable for Jaguar & Land Rover — switch on the reversing / rear-view camera feed so the picture appears on the touchscreen when you select reverse. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the camera and wiring to be present on the vehicle.

Heated Front Seats configuration for Jaguar & Land Rover — tell the car exactly which front-seat climate hardware is fitted so heating (and, where fitted, cooling) works correctly. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Heated Rear Seats configuration for Jaguar & Land Rover — tell the car which rear-seat climate hardware is fitted (second row, second & third row, heated only or heated & cooled) so the feature works correctly. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Ventilated (cooled) Seats enable for Jaguar & Land Rover — switch on the seat ventilation fans that draw air through the cushion to keep you cool. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires ventilated-seat hardware fitted.

Seat Massage enable for Jaguar & Land Rover — switch on the pneumatic massage function and match it to the massage hardware fitted (front, rear, and the number of air cells). Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires massage-seat hardware.

Heated Steering Wheel enable for Jaguar & Land Rover — switch on the heating element in the steering wheel so it warms up on cold mornings. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires a heated steering wheel fitted.

Memory Function enable for Jaguar & Land Rover — switch on the driver memory that stores and recalls seat, mirror and (where fitted) steering-column positions at the touch of a button or with the key. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires memory-capable seats/mirrors.

Rear Door Sunblinds enable for Jaguar & Land Rover — switch on the manual or powered rear-door window blinds, with or without the door switches. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the blinds fitted.

Keyless Entry & Start configuration for Jaguar & Land Rover — enable passive keyless entry and/or push-button start and match it to the variant fitted to your vehicle. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the keyless hardware fitted.

Walk-Away Locking enable for Jaguar & Land Rover — have the car lock itself automatically when you walk away with the key. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires keyless (passive-entry) hardware fitted.

Global Open / Close enable for Jaguar & Land Rover — open or close all windows (and, where fitted, the sunroof) together from the key fob or door handle. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Remote Start / Parking Heater configuration for Jaguar & Land Rover — set the related comfort parameter to match your vehicle. Applied in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. The dropdown values on this item control the seat-ventilation flag — choose the value that matches the hardware fitted to your car.

Soft-Close Doors enable for Jaguar & Land Rover — switch on the powered latches that pull each door fully shut from ajar, so you never have to slam them. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires soft-close hardware fitted.

Powered / Gesture Tailgate configuration for Jaguar & Land Rover — set the tailgate type and enable powered open/close, soft-close and, where fitted, hands-free kick-sensor operation. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the matching tailgate hardware.

Power Tailgate enable for Jaguar & Land Rover — set the tailgate type and switch on powered open/close and soft-close to match your vehicle. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the matching tailgate hardware.

Retractable Running Boards enable for Jaguar & Land Rover — switch on the powered side steps that deploy when a door opens and tuck away when you drive off. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the running-board hardware fitted.

Rear Air Conditioning configuration for Jaguar & Land Rover — tell the car which rear climate hardware is fitted (rear A/C circuit, rear console vents, auxiliary HeVAC unit or additional blower) so rear cooling works correctly. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Heated Windscreen configuration for Jaguar & Land Rover — enable the heated front screen, heated washer jets and heated wiper park to match the hardware fitted, for fast de-icing. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Climate Control Unit configuration for Jaguar & Land Rover — set the correct climate system type and number of zones (single / dual / 3 / 4-zone) so the heating and air-conditioning controls match your vehicle. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Configurable Ambient Lighting for Jaguar & Land Rover — unlock the full interior mood-lighting palette and zones (dual, tri-colour, multi-zone, 30-colour with animations) to match the hardware fitted. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Adaptive Driving Beam / Adaptive High Beam enable for Jaguar & Land Rover — let the headlights automatically shape and dip the main beam around other traffic so you keep maximum light without dazzling others. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the matrix/adaptive LED headlamps.

Animated (Sweeping) Indicators enable for Jaguar & Land Rover — switch on the sequential ‘sweeping’ turn-signal animation on the side and rear indicators. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires compatible LED indicator hardware.

Follow-Me-Home Lights enable for Jaguar & Land Rover — keep the headlights on for a short time after you lock and leave the car to light your way. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Approach Lamps enable for Jaguar & Land Rover — have the exterior lights welcome you by illuminating as you approach the car with the key. Set in software via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the puddle/approach lamp hardware.

Smartphone Projection (Apple CarPlay / Android Auto) enable for Jaguar & Land Rover — switch on wired/wireless phone mirroring on the touchscreen, including mySPIN and (China) Baidu CarLife where fitted. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Navigation System region enable for Jaguar & Land Rover — turn on the built-in satellite navigation and set the correct regional map/database for your market (EU, USA/Canada, Japan, China, Middle East and more). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Video In Motion (VIM) enable for Jaguar & Land Rover — allow the front touchscreen to keep playing video while the vehicle is moving, with a choice of speed threshold. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. For passenger use — obey local laws.

DAB Digital Radio enable for Jaguar & Land Rover — switch on Digital Audio Broadcasting so you get DAB/DAB+ stations and station text alongside FM/AM. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the DAB tuner/aerial.

Rear Seat Entertainment (RSE) enable for Jaguar & Land Rover — switch on the rear-screen entertainment system for back-seat passengers, including the extra-DVD variant where fitted. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the rear-screen hardware.

Pivi Pro MY25 interface layout coding for Land Rover & Jaguar — set the correct touchscreen interface for the fitted display (single or dual screen), including the second-generation Dynamic layout. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Head-Up Display (HUD) enable for Jaguar & Land Rover — switch on the windscreen head-up display and choose how it is turned on/off (hard switch or cluster menu). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the HUD projector hardware.

SV / Autobiography welcome (start-up) screen logo for Land Rover & Jaguar — choose which logo animation appears on the touchscreen at start-up (SV, SVR, SVX, R-Dynamic and colour variants). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

ATPC (All Terrain Progress Control) enable for Land Rover — switch on low-speed off-road cruise control and its related functions (Hill Descent Control, Low-Speed Progress Control). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the supporting chassis hardware.

Terrain Response enable for Land Rover — switch on the terrain/drive-mode system (including Auto Terrain Response and Configurable Dynamic) so the car adapts to sand, mud, snow and more. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the supporting hardware.

TCU / Telematics OFF for Jaguar & Land Rover — disable the telematics control unit (the built-in modem/tracker) so the car stops transmitting, for privacy or workshop use. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Reversible with SW257.

TCU / Telematics Restore for Jaguar & Land Rover — re-enable the telematics control unit and connected services after it was switched off. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. The counterpart to SW256.

Remote Engine Start (RES) enable for Jaguar & Land Rover — let the engine be started remotely (from the key or app) to pre-heat or pre-cool the cabin, and set how it behaves. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

InControl services package coding for Jaguar & Land Rover — set the correct InControl tier (Protect, Connect, Connect Pro) to match the telematics unit fitted, so the right connected features are enabled. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Winter / Cold-Weather Pack enable for Jaguar & Land Rover — switch on the cold-weather comfort features fitted (heated/cooled front & rear seats, heated steering wheel, heated windscreen, heated washer jets, wiper park). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Seat Comfort Pack enable for Jaguar & Land Rover — switch on the seat comfort features fitted: heated/cooled front seats, ventilated seats, seat massage (all patterns) and seat memory. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the seat hardware.

Driver Assistance Pack enable for Jaguar & Land Rover — switch on the ADAS features fitted: cruise / adaptive cruise (with Stop & Go), Blind Spot Information System, Lane Departure Warning and Traffic Sign Recognition. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the sensors/cameras.

Park Assist Camera enable for Jaguar & Land Rover — switch on the rear/park-assist camera in the correct wiring form (LIN or CAN, standard or FMVSS111). Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the camera hardware.

Terrain Response & Hill Descent Control enable for Land Rover — switch on the terrain/drive-mode system and Hill Descent Control together. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile. Requires the supporting chassis hardware.

Infotainment Pack enable for Jaguar & Land Rover — switch on the media features fitted: smartphone projection (CarPlay / Android Auto / mySPIN / Baidu CarLife), navigation (regional map) and Video In Motion. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Configurable Ambient Lighting enable for Jaguar & Land Rover — unlock the full interior mood-lighting palette and zones (dual, tri-colour, multi-zone, 30-colour with animation and presets) to match the hardware fitted. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

Keyless & Comfort Access Pack enable for Jaguar & Land Rover — switch on Keyless Entry & Start, Global Open/Close (remote window/sunroof) and seat ventilation to match the hardware fitted. Set via the CCF and coded to your VIN / As-Built over OBD, remote & mobile.

4x4 Information Display for Jaguar & Land Rover — Enable 4x4 Information Display on the touchscreen for off-road telemetry. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Advanced Chauffeur Function for Jaguar & Land Rover — Enable AFC (Advanced Chauffeur Function) for semi-autonomous highway driving. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Brake Auto Hold – Default On for Jaguar & Land Rover — Have brake Auto Hold default to ON at every start instead of needing to be switched on manually each time. Convenient in traffic and at lights. Fully reversible. Configured via CCF over OBD. EVA2 only (BCM L8B2 or higher). Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Limited Slip Differential for Jaguar & Land Rover — Enable electronic limited slip differential for improved traction and cornering. Coded to your VIN / As-Built over the OBD port, remote & mobile. Requires the necessary hardware already fitted to your vehicle — software activation only, no parts supplied.

Neutral Control Auto Gear for Jaguar & Land Rover — Enable automatic neutral when stationary to reduce fuel consumption. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Rear Differential Config for Jaguar & Land Rover — Configure rear differential settings – rear e-diff not fitted / fitted. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Roll Stability Control for Jaguar & Land Rover — Enable Roll Stability Control for enhanced stability during cornering and off-road driving. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Shift into Park Apply for Jaguar & Land Rover — Enable/disable Shift into Park Apply with Park Release. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Transfer Box Config for Jaguar & Land Rover — Configure transfer box – single speed without controller / not fitted. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

RPM Speed Controller for Jaguar & Land Rover — Configure RPM speed controller for engine management. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Speed Limitation Config for Jaguar & Land Rover — Configure or remove factory speed limitation settings. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

220 MPH Speedo for Jaguar & Land Rover — Change digital speedometer maximum from 155mph to 220mph. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Accessory USB Unit for Jaguar & Land Rover — Enable USB and iPod function in IAM – accessory USB unit configuration. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Advanced Voice Control for Jaguar & Land Rover — Enable Advanced Speech Recognition voice control system. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Audio Brand Configuration for Jaguar & Land Rover — Configure premium audio brand - Meridian, B&W (EUCD248) Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Bluetooth Handsfree + Audio Streaming for Jaguar & Land Rover — Enable Bluetooth Handsfree + Audio streaming + SMS for phone integration. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Connect and View (InControl) for Jaguar & Land Rover — Enable CE App Projection Features – mySPIN Fitted Only for InControl apps. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Conversation Assist for Jaguar & Land Rover — Enable conversation assist – microphone relay between front and rear passengers. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Headphone Sockets Rear for Jaguar & Land Rover — Enable rear headphone outlet functionality. Coded to your VIN / As-Built over the OBD port, remote & mobile. Requires the necessary hardware already fitted to your vehicle — software activation only, no parts supplied.

In Car Entertainment Pack for Jaguar & Land Rover — Configure In Car Entertainment – 3000Nit Series ICE Pack or higher. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Language Configuration for Jaguar & Land Rover — Set vehicle language – ENGLISH UK for Instrument and Radio / other languages. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Microphone Config for Jaguar & Land Rover — Configure microphone – microphone (Driver Only) or dual mic. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Nav Destination Entry on Move for Jaguar & Land Rover — Enter navigation destinations while vehicle is moving. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Navigation Speed Inhibit for Jaguar & Land Rover — Configure/disable navigation speed inhibit for destination entry. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Radio Amp & Speaker System for Jaguar & Land Rover — Configure audio system – Audio Mid Performance (MP) / Audio High Performance. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Telephone Enable for Jaguar & Land Rover — Enable telephone integration – without telephone / with telephone. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Remote Lock/Unlock Services for Jaguar & Land Rover — Configure remote lock, unlock, window close, and sunroof close via app (MultiCAN511) Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

TCU Connectivity Configuration for Jaguar & Land Rover — Configure cellular and WiFi connectivity for telematics unit (MultiCAN503) Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Telematics SOS / Emergency Call for Jaguar & Land Rover — Enable/disable emergency SOS call functionality and stolen vehicle tracking (EUCD203) Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Auto Lights for Jaguar & Land Rover — Enable automatic headlight activation based on ambient light conditions. Coded to your VIN / As-Built over the OBD port, remote & mobile. Requires the necessary hardware already fitted to your vehicle — software activation only, no parts supplied.

Corner Lamp Function for Jaguar & Land Rover — Enable corner lamp illumination during low-speed turns for improved visibility. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Daytime Running Light Config for Jaguar & Land Rover — Configure DRL mode – standard dipped light (Non-DTRL) or DRL modes. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Dimmed Dipped Headlights for Jaguar & Land Rover — Enable dimmed dipped headlight function for parking/city driving. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Foglight Function Config for Jaguar & Land Rover — Configure front fog light function – foglight front settings. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Front Door Warning Lamps for Jaguar & Land Rover — Enable LED front door warning lamps – less front door warning lamps / fitted. Coded to your VIN / As-Built over the OBD port, remote & mobile. Requires the necessary hardware already fitted to your vehicle — software activation only, no parts supplied.

Headlight Cleaning for Jaguar & Land Rover — Enable headlight washer/cleaning system operation. Coded to your VIN / As-Built over the OBD port, remote & mobile. Requires the necessary hardware already fitted to your vehicle — software activation only, no parts supplied.

Headlight Type Configuration for Jaguar & Land Rover — Configure headlight technology - Halogen, LED, Matrix LED (EUCD014) Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Headlights Symmetry for Jaguar & Land Rover — Configure headlights symmetry for LHD/RHD market adaptation. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Homesafe Lighting for Jaguar & Land Rover — Configure homesafe lighting – lights stay on for set time after locking. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Rear Fog/Tow Light Function for Jaguar & Land Rover — Configure rear fog/tow light function for towing applications. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

User Configurable DRL for Jaguar & Land Rover — Allow DRL to be toggled on/off in vehicle settings instead of always on. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.

Cluster Level Config for Jaguar & Land Rover — Configure instrument cluster display level and features. Coded to your VIN / As-Built over the OBD port, remote & mobile. No parts required — software only.