Cart is empty
Please sign in so that we can notify you about a reply
★ NON-OEM CHANGE-ID SMART KEY ★
Lock50 HW30 Non-OEM JLR Land Rover & Jaguar Change-ID Smart Key (315 MHz) — Auto Walk-Away Locking & Approach Unlocking
Replaces OEM Key Part Numbers: JK52-15K601-CL (2022–2025) & JK52-15K601-CM (2025–2027) • FCC ID: KOBJXF23A.
Non-OEM high-security Change-ID smart key engineered for all 2017 to 2026+ JLR vehicles equipped with any UWB-supporting RFA module (including JPLA, K8D2, and M9R3 families). Features Simulated UWB — provides fully functional Walk-Away auto-locking, approach auto-unlocking, door handle request buttons, and keyless push-start identical to OEM operation, programmed via Lock50 SW36 key copy with HW03-C test cable without replacing vehicle modules.
✔ Full Walk-Away Auto-Locking
Walk away from vehicle to automatically lock; walk up to automatically unlock. Fully functional door handle request buttons and keyless start.
✔ Simulated UWB Architecture
Non-OEM custom transponder with simulated UWB. Operates flawlessly with vehicle proximity systems without needing costly OEM silicon.
✔ Works with All UWB RFA Modules
Compatible with all JLR RFA modules that support UWB: 1-plug, 2-plug, and 3-plug units across JPLA, K8D2, and M9R3 series.
✔ SW36 Key Copy via HW03-C
Non-invasive direct connection to RFA. Bypasses locked armed mode and factory 2-key quorum locks for spare keys and All Keys Lost.
OEM Key Part Numbers Replaced by Lock50 HW30
Lock50 HW30 directly replaces the following factory Land Rover / Jaguar OEM key references:
- JK52-15K601-CL (2022–2025) & JK52-15K601-CM (2025–2027) • FCC ID: KOBJXF23A
- Works on all late-generation Range Rover (L405 / L460), Range Rover Sport (L494 / L461), Defender (L663), Discovery 5 (L462), Velar (L560), and Evoque (L551) with UWB keyless entry.
JLR key technology — the 3 ways to open & close the doors
Every JLR key in this range gives you push-button keyless start inside the car — that is the same on all of them. The only difference is how you open and close the doors. There are 3 ways:
🔑
PSFOB (without UWB)
Press the key button only
- ✓Press the button on the key to lock / unlock the doors
- ✓Nothing happens at the door handle
- ✓Push-button keyless start inside the car
🚪
PEPSFOB (with UWB)
Key button OR door-handle button
- ✓Press the key button, or the button on the door handle with the key on you
- ✓OEM UWB keys add secure ranging that blocks relay theft (2020+)
- ✓Push-button keyless start inside the car
🚶
PEPSFOB (with UWB) + walk-away
No button at all
- ✓Walk up to the car to unlock
- ✓Walk away to lock
- ✓Push-button keyless start inside the car
OEM UWB Walk-Away: HW27 (433 MHz) / HW28 (315 MHz)
Non-OEM Change-ID Walk-Away: HW29 (433 MHz) / HW30 (315 MHz)
Universal Vehicle & CCF Rules for Walk-Away Keys (Applies to OEM HW27/HW28 & Non-OEM HW29/HW30):
Whether using OEM keys (HW27 / HW28) or Non-OEM Change-ID keys (HW29 / HW30), the vehicle itself must support and have the walk-away function activated:
- Vehicles With Factory Walk-Away: If the car already came from the factory with the walk-away locking and unlocking feature enabled, both OEM (HW27/HW28) and Non-OEM (HW29/HW30) keys deliver automatic walk-away locking and approach unlocking immediately.
- Vehicles Without Factory Walk-Away (CCF Upgrade Required): If the car has compatible UWB hardware but did NOT come with walk-away enabled from the factory, the vehicle's CCF (Car Configuration File) must first be upgraded / enabled using Lock50 CCF tools to turn the walk-away feature on for either OEM or Non-OEM keys to walk-away lock/unlock.
- Older Models (Before M8E2 BCM System): Older models manufactured before the M8E2 BCM system cannot get walk-away locking or unlocking with any key (neither OEM HW27/HW28 nor Non-OEM HW29/HW30) because the vehicle's electronic architecture does not support it. On these cars, keys work as standard PEPS—the driver opens and closes the doors using the door handle button or key remote buttons as normal, with push-button start inside.
- Key Copy Function on UWB Models: HW29 and HW30 work with all UWB models for key copy via SW36 + HW03-C. The resulting key function always matches the car's existing feature level.
Full JLR key range — which key, which car, when
Tap any key below to open its page.
| Key(s) | How doors open / close | Works on which cars | When to use it |
|---|---|---|---|
| Copy key (change-ID) → all keys | Same as the key it copies: PSFOB (without UWB — key button) or PEPSFOB (with UWB — door-handle button). | All 2017–2026 cars, UWB or non-UWB, EVA1 or EVA2. | Copy an existing key. Non-UWB car (EVA1 2017–2020, RFA locked): over OBD with SW35 + HW03-D. UWB-enabled car (2017–2026): with SW36 + HW03-C — the copy works the same as a PEPSFOB (with UWB) key, full keyless, only walk-away missing. Never learned over OBD as a new key. |
| OEM PSFOB (without UWB) → all keys | Press the key button only. | Cars that came PSFOB (without UWB) 2017–2026. | RFA unlocked → add as a new key over OBD or in the RFA dump. |
| Lock50 PSFOB (without UWB) / PEPSFOB (with UWB) → all keys | Press the key button, or the door-handle button. | UWB and non-UWB cars 2017–2026 (turn UWB off first, SW25). | RFA unlocked → the cheapest new key; first choice when adding a key. |
| OEM PEPSFOB (with UWB) → all keys |
UWB car: door-handle button or key button. Non-UWB car: key button only (RKE remote) — the car has no keyless antennas in the doors. |
Any 2017–2026 car, UWB or non-UWB. On a non-UWB car it works the same as a PSFOB (without UWB) key. | New key. All entry and start works — no walk-away. |
|
HW27 (433 MHz) / HW28 (315 MHz)
OEM walk-away → all keysTHIS KEY
|
Walk up to unlock, walk away to lock — no button. | 2022+ walk-away cars. | OEM new key. Walk-away on 2022+ M8E2 cars (or where CCF is upgraded/enabled). Pre-M8E2 cars operate via door handle/buttons. |
|
NON-OEM WALK-AWAY (NEW)
|
Walk-Away Locking & Unlocking: Walk up to unlock, walk away to lock (on 2022+ M8E2 vehicles or where CCF is upgraded/enabled). On older pre-M8E2 cars, works via door handle or remote button as normal. | All 2017–2026+ UWB cars (JPLA, K8D2, M9R3 • 1-plug, 2-plug & 3-plug). | Non-OEM Change-ID key. Replaces OEM keys JK52-15K601-DL/DM (HW27) and JK52-15K601-CL/CM (HW28). Works for key copy on all UWB models. Function matches vehicle configuration. |
Note: every key above gives the same push-button keyless start inside the car — only the way you open / close the doors changes.
All models covered 2022+ with the same type of key shape as pictured — Land Rover Defender L663 (2020+), Discovery 5 L462 (2017+), Discovery Sport L550 (2018+), Range Rover Sport L494 (2018+), Range Rover Velar L560 (2017+), Range Rover Evoque L551 (2019+), Range Rover L405 (2018+) and Jaguar XE X750 (2020+).
Before programming, check one thing on the car: Is RFA locked or unlocked?
That is the only thing that decides your workflow route. Read the car over OBD with SW20 to inspect the RFA page:
Need CCF Enhancements? Activate Walk-Away auto-locking on compatible vehicles with Lock50 CCF services.
JLR Tools
